On 16:46-20230929, Roger Quadros wrote:
CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes. USB and MMC nodes need pinmux.
Mark them as 'bootph-all' so they are available in all pre-relocation phases.
Fixes below dts warning:
<stdout>: Warning (dmas_property): /bus@f4000/ethernet@8000000:dmas: Could not get phandle node for (cell 0)
Signed-off-by: Roger Quadros rogerq@kernel.org
arch/arm/dts/k3-am642-evm-u-boot.dtsi | 48 +++++++++++++++++++++++++++ arch/arm/dts/k3-am642-r5-evm.dts | 8 +++++ 2 files changed, 56 insertions(+)
diff --git a/arch/arm/dts/k3-am642-evm-u-boot.dtsi b/arch/arm/dts/k3-am642-evm-u-boot.dtsi index d06955dfbc..953bbe9aaf 100644 --- a/arch/arm/dts/k3-am642-evm-u-boot.dtsi +++ b/arch/arm/dts/k3-am642-evm-u-boot.dtsi @@ -51,6 +51,10 @@ bootph-all; };
+&main_usb0_pins_default {
- bootph-all;
+};
&usb0 { dr_mode="peripheral"; bootph-all; @@ -100,12 +104,56 @@ bootph-all; };
+&main_mmc1_pins_default {
- bootph-all;
+};
&sdhci1 { bootph-all; };
+&inta_main_dmss {
- bootph-all;
+};
+&main_pktdma {
- bootph-all;
+};
+&mdio1_pins_default {
- bootph-all;
+};
+&cpsw3g_mdio {
- bootph-all;
+};
+&cpsw3g_phy0 {
- bootph-all;
+};
+&rgmii1_pins_default {
- bootph-all;
+};
+&rgmii2_pins_default {
- bootph-all;
+};
&cpsw3g { bootph-all;
- ethernet-ports {
bootph-all;- };
+};
+&phy_gmii_sel {
- bootph-all;
+};
+&cpsw_port1 {
- bootph-all;
};
&cpsw_port2 { diff --git a/arch/arm/dts/k3-am642-r5-evm.dts b/arch/arm/dts/k3-am642-r5-evm.dts index 696735d8e2..64b3c3af63 100644 --- a/arch/arm/dts/k3-am642-r5-evm.dts +++ b/arch/arm/dts/k3-am642-r5-evm.dts @@ -74,6 +74,14 @@ ti,secure-host; };
+&vtt_supply {
- bootph-pre-ram;
+};
+&memorycontroller {
- vtt-supply = <&vtt_supply>;
+};
&sdhci0 { clocks = <&clk_200mhz>; clock-names = "clk_xin"; -- 2.34.1
Reviewed-by: Nishanth Menon nm@ti.com