From: Haiying Wang Haiying.Wang@freescale.com
For some board which doesn't have NOR flash and the QE's firmware(ucode) is saved in its NAND flash, we don't want call qe_init in cpu_init_r, but will call it later after nand is initialized.
Signed-off-by: Haiying Wang Haiying.Wang@freescale.com --- arch/powerpc/cpu/mpc85xx/cpu_init.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 4b8faa5..eb34378 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -369,7 +369,7 @@ int cpu_init_r(void)
enable_cpc();
-#ifdef CONFIG_QE +#if defined(CONFIG_QE) && !defined(CONFIG_SYS_QE_FW_IN_NAND) uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */ qe_init(qe_base); qe_reset();