From: Tien Fong Chee tien.fong.chee@intel.com
This document would describe the steps for building SPL and U-Boot, and showing the proposed layout for the QSPI flash.
Signed-off-by: Tien Fong Chee tien.fong.chee@intel.com Signed-off-by: Sieu Mun Tang sieu.mun.tang@intel.com --- doc/README.socfpga_arria10_qspi_socdk | 56 +++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 doc/README.socfpga_arria10_qspi_socdk
diff --git a/doc/README.socfpga_arria10_qspi_socdk b/doc/README.socfpga_arria10_qspi_socdk new file mode 100644 index 0000000000..57ebef2510 --- /dev/null +++ b/doc/README.socfpga_arria10_qspi_socdk @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 + /* + * Copyright (C) 2019 Intel Corporation <www.intel.com> + * + */ + +---------------------------------------- +SOCFPGA Documentation for U-Boot and SPL +---------------------------------------- +This README is about U-Boot and SPL support for Arria 10 QSPI SoCDK. + +a. Steps for building SPL and U-Boot: +------------------------------------- +1. cd to U-Boot source directory. +2. Build both SPL and U-Boot, runs "export CROSS_COMPILE=arm-altera-eabi-; +make mrproper; make socfpga_arria10_qspi_defconfig; make -8" +3.Runs "mkpimage -hv 1 -o spl/spl_w_dtb-mkpimage.bin + spl/u-boot-spl-dtb.bin spl/u-boot-spl-dtb.bin spl/u-boot-spl-dtb.bin + spl/u-boot-spl-dtb.bin" + +b. Steps for building default FIT image for FPGA bitstreams: +------------------------------------------------------------ +1. Copy both ghrd_10as066n2.periph.rbf and ghrd_10as066n2.core.rbf to U-Boot +source root directory. +2. Runs "tools /mkimage -E -f + board/altera/arria10-socdk/fit_spl_fpga.its fit_spl_fpga.itb" + +c. Steps for buiding default FIT image for U-Boot: +-------------------------------------------------- +1. Ensure a. Steps for building SPL and U-Boot are done. +2. Runs "tools/mkimage -E -f board/altera/arria10-socdk/fit_uboot.its + fit_spl_uboot.itb" + +d. Steps for buiding default FIT image for Linux and DTB: +--------------------------------------------------------- +1. Copy uImage & socfpga_arria10_socdk_qspi.dtb to U-Boot source root directory. +2. Runs "tools/mkimage -f + board/altera/arria10-socdk/fit_kernel.its kernel.itb" + +After going through all steps described above, those images/binaries can be +written into QSPI flash as shown in below proposed layout. Ensure no overlapping +for each image. + +Addr 0 -------------------------------------- + | spl_w_dtb-mkpimage.bin | 1MB + -------------------------------------- + | fit_spl_uboot.itb | 1MB + -------------------------------------- + |env(64K) & env_redundant(64k) | 1MB + -------------------------------------- + | fit_spl_fpga.itb | depend on bitstreams size +Addr 0x1200000 -------------------------------------- + | kernel.itb | depend on kernel.itb size +Addr 0x2720000 -------------------------------------- + |console-image-minimal-arria10.jffs2 | -(RFS) + --------------------------------------