On 12/23/21 08:26, Tony Dinh wrote:
Add board implementation for Pogoplug V4
Note: currently the fdt_get_phy_addr function in this file is duplicate in this board and many other Kirkwood boards (eg. Sheevaplug, GoFlex Home, etc.). This function is being factored out into common area by another patch. And because it was written for flattree only, the patch is being rewritten to use livetree calls.
Signed-off-by: Tony Dinh mibodhi@gmail.com
Changes in v2: Merge constants from header file.
board/cloudengines/pogo_v4/pogo_v4.c | 220 +++++++++++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 board/cloudengines/pogo_v4/pogo_v4.c
Ups. And now you bring in the C file for the Makefile from patch 6/8? This will make problems with git bi-secting. Please squash both patches into one instead.
Thanks, Stefan
diff --git a/board/cloudengines/pogo_v4/pogo_v4.c b/board/cloudengines/pogo_v4/pogo_v4.c new file mode 100644 index 0000000000..c85de0b22e --- /dev/null +++ b/board/cloudengines/pogo_v4/pogo_v4.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright (C) 2014-2021 Tony Dinh mibodhi@gmail.com
- Based on
- Copyright (C) 2012 David Purdy david.c.purdy@gmail.com
- Based on Kirkwood support:
- (C) Copyright 2009
- Marvell Semiconductor <www.marvell.com>
- Written-by: Prafulla Wadaskar prafulla@marvell.com
- */
+#include <common.h> +#include <miiphy.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#include <asm/arch/mpp.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> +#include <asm/mach-types.h> +#include <bootstage.h> +#include <command.h> +#include <init.h> +#include <linux/bitops.h>
+DECLARE_GLOBAL_DATA_PTR;
+/* GPIO configuration */ +#define POGO_V4_OE_LOW (~(0)) +#define POGO_V4_OE_HIGH (~(0)) +#define POGO_V4_OE_VAL_LOW BIT(29) +#define POGO_V4_OE_VAL_HIGH 0
+/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL BIT(4) +#define MV88E1116_RGMII_RXTM_CTRL BIT(5)
+/* button */ +#define BTN_EJECT 29
+int board_early_init_f(void) +{
- /*
* default gpio configuration* There are maximum 64 gpios controlled through 2 sets of registers* the below configuration configures mainly initial LED status*/- mvebu_config_gpio(POGO_V4_OE_VAL_LOW,
POGO_V4_OE_VAL_HIGH,POGO_V4_OE_LOW, POGO_V4_OE_HIGH);- /* Multi-Purpose Pins Functionality configuration */
- u32 kwmpp_config[] = {
MPP0_NF_IO2,MPP1_NF_IO3,MPP2_NF_IO4,MPP3_NF_IO5,MPP4_NF_IO6,MPP5_NF_IO7,MPP6_SYSRST_OUTn,MPP7_GPO,MPP8_TW_SDA,MPP9_TW_SCK,MPP10_UART0_TXD,MPP11_UART0_RXD,MPP12_SD_CLK,MPP13_SD_CMD,MPP14_SD_D0,MPP15_SD_D1,MPP16_SD_D2,MPP17_SD_D3,MPP18_NF_IO0,MPP19_NF_IO1,MPP20_SATA1_ACTn,MPP21_SATA0_ACTn,MPP22_GPIO, /* Green LED */MPP23_GPIO,MPP24_GPIO, /* Red LED */MPP25_GPIO,MPP26_GPIO,MPP27_GPIO,MPP28_GPIO,MPP29_GPIO, /* Eject button */MPP30_GPIO,MPP31_GPIO,MPP32_GPIO,MPP33_GPIO,MPP34_GPIO,MPP35_GPIO, /* FR6192 has only 36 GPIOs */0- };
- kirkwood_mpp_conf(kwmpp_config, NULL);
- return 0;
+}
+int board_late_init(void) +{
- /* Do late init to ensure successful enumeration of XHCI devices */
- pci_init();
- return 0;
+}
+int board_init(void) +{
- /* Boot parameters address */
- gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
- return 0;
+}
+int fdt_get_phy_addr(const char *path) +{
- const void *fdt = gd->fdt_blob;
- const u32 *reg;
- const u32 *val;
- int node, phandle, addr;
- /* Find the node by its full path */
- node = fdt_path_offset(fdt, path);
- if (node >= 0) {
/* Look up phy-handle */val = fdt_getprop(fdt, node, "phy-handle", NULL);if (!val) {/* Look up phy (deprecated property for phy handle) */val = fdt_getprop(fdt, node, "phy", NULL);}if (val) {phandle = fdt32_to_cpu(*val);if (!phandle)return -FDT_ERR_NOTFOUND;/* Follow it to its node */node = fdt_node_offset_by_phandle(fdt, phandle);if (node) {/* Look up reg */reg = fdt_getprop(fdt, node, "reg", NULL);if (reg) {addr = fdt32_to_cpu(*reg);return addr;}}}- }
- return -FDT_ERR_NOTFOUND;
+}
+#if defined(CONFIG_RESET_PHY_R) +/* Configure and initialize PHY */ +void reset_phy(void) +{
- u16 reg;
- int phyaddr;
- char *name = "ethernet-controller@72000";
- char *eth0_path = "/ocp@f1000000/ethernet-controller@72000";
- if (miiphy_set_current_dev(name))
return;- phyaddr = fdt_get_phy_addr(eth0_path);
- if (phyaddr < 0)
return;- /*
* Enable RGMII delay on Tx and Rx for CPU port* Ref: sec 4.7.2 of chip datasheet*/- miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2);
- miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, ®);
- reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
- miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
- miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0);
- /* reset the phy */
- miiphy_reset(name, phyaddr);
- printf("88E1116 Initialized on %s\n", name);
+} +#endif /* CONFIG_RESET_PHY_R */
+#if CONFIG_IS_ENABLED(BOOTSTAGE) +#define GREEN_LED BIT(22) +#define RED_LED BIT(24) +#define BOTH_LEDS (GREEN_LED | RED_LED) +#define NEITHER_LED 0
+static void set_leds(u32 leds, u32 blinking) +{
- struct kwgpio_registers *r;
- u32 oe;
- u32 bl;
- r = (struct kwgpio_registers *)MVEBU_GPIO0_BASE;
- oe = readl(&r->oe) | BOTH_LEDS;
- writel(oe & ~leds, &r->oe); /* active low */
- bl = readl(&r->blink_en) & ~BOTH_LEDS;
- writel(bl | blinking, &r->blink_en);
+}
+void show_boot_progress(int val) +{
- switch (val) {
- case BOOTSTAGE_ID_RUN_OS: /* booting Linux */
set_leds(BOTH_LEDS, NEITHER_LED);break;- case BOOTSTAGE_ID_NET_ETH_START: /* Ethernet initialization */
set_leds(GREEN_LED, GREEN_LED);break;- default:
if (val < 0) /* error */set_leds(RED_LED, RED_LED);break;- }
+} +#endif
Viele Grüße, Stefan Roese