On Fri, Apr 03, 2020 at 02:58:08AM -0700, Bin Meng wrote:
Currently the driver gets ns16550 base address in the driver probe() routine, which may potentially break any ns16550 wrapper driver that does additional initialization before calling ns16550_serial_probe().
Things are complicated that we need consider ns16550 devices on both simple-bus and PCI bus. To fix the issue we move the base address assignment for simple-bus ns16550 device back to the ofdata_to_platdata(), and assign base address for PCI ns16550 device in ns16550_serial_probe().
This is still not perfect. Ideally if any PCI bus based ns16550 wrapper driver tries to access plat->base before calling probe(), it is subject to break.
Thank you. I have tested it and it fixes my case.
Tested-by: Andy Shevchenko andriy.shevchenko@linux.intel.com
Fixes: 720f9e1fdb0c9 ("serial: ns16550: Move PCI access from ofdata_to_platdata() to probe()")
I believe this should be one line.
Reported-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Bin Meng bmeng.cn@gmail.com
drivers/serial/ns16550.c | 51 +++++++++++++++++++++++------------------------- 1 file changed, 24 insertions(+), 27 deletions(-)
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index c1b303f..5e3cd1c 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -479,39 +479,24 @@ static int ns16550_serial_getinfo(struct udevice *dev, return 0; }
-#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) -static int ns1655_serial_set_base_addr(struct udevice *dev) -{
- fdt_addr_t addr;
- struct ns16550_platdata *plat;
- plat = dev_get_platdata(dev);
- addr = dev_read_addr_pci(dev);
- if (addr == FDT_ADDR_T_NONE)
return -EINVAL;-#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
- plat->base = addr;
-#else
- plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
-#endif
- return 0;
-} -#endif
int ns16550_serial_probe(struct udevice *dev) {
- struct ns16550_platdata *plat = dev->platdata; struct NS16550 *const com_port = dev_get_priv(dev); struct reset_ctl_bulk reset_bulk;
- fdt_addr_t addr; int ret;
-#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
- ret = ns1655_serial_set_base_addr(dev);
- if (ret)
return ret;-#endif
/*
* If we are on PCI bus, either directly attached to a PCI root port,* or via a PCI bridge, assign platdata->base before probing hardware.*/if (device_is_on_pci_bus(dev)) {
addr = devfdt_get_addr_pci(dev);if (addr == FDT_ADDR_T_NONE)return -EINVAL;plat->base = addr;}
ret = reset_get_bulk(dev, &reset_bulk); if (!ret)
@@ -535,9 +520,21 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) { struct ns16550_platdata *plat = dev->platdata; const u32 port_type = dev_get_driver_data(dev);
fdt_addr_t addr; struct clk clk; int err;
addr = dev_read_addr(dev);
if (addr != FDT_ADDR_T_NONE) {
+#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
plat->base = addr;+#else
plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);+#endif
- } else if (!device_is_on_pci_bus(dev)) {
return -EINVAL;- }
- plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0); plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0); plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1);
-- 2.7.4