Hi Tom,
On 05/02/2014 04:10 PM, Michal Simek wrote:
From: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com
Added support to load a bitstream image in chunks by reading it in chunks from SD/MMC. Command format: loadfs [dev] [address] [image size] [blocksize] <interface> [<dev[:part]>] <filename> Example: fpga loadfs 0 1000000 3dbafc 4000 mmc 0 fpga.bin
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com
We have tested just FAT case but I am sending this as RFC to give some inputs from you. The reason for this command is that when u-boot running from OCM on zynq there is just 192kB for u-boot itself and there must be an option to load bitstream to PL because there full DDR controller. Bitstreams are bigger and bigger and reading it with chunks is only one way how to do it. This is also necessary to do it for u-boot SPL when we add fpga support there.
The question is if this is the way how to extend fpga command because loadfs should be fpga subcommand.
This patch is based on this branch. http://git.denx.de/?p=u-boot/u-boot-microblaze.git;a=shortlog;h=refs/heads/x...
Thanks for your comments, Michal
common/cmd_fpga.c | 41 +++++++++++++++++++++ drivers/fpga/fpga.c | 28 ++++++++++++++ drivers/fpga/xilinx.c | 16 ++++++++ drivers/fpga/zynqpl.c | 85 +++++++++++++++++++++++++++++++++++++++++++ include/configs/zynq-common.h | 1 + include/fpga.h | 9 +++++ include/xilinx.h | 3 ++ 7 files changed, 183 insertions(+)
Are you OK with this patch? I would expect that you will have some comments regarding this because it is command extension. If you are OK with this I will add it to my next fpga pull request with partial bitstream support.
Thanks, Michal