On 05/07/2019 11:42 AM, Kever Yang wrote:
On 04/16/2019 09:50 PM, David Wu wrote:
Some Socs use the pull-pin-default config param, need to add it. And input-enable/disable config params are not necessary, remove it.
Signed-off-by: David Wu david.wu@rock-chips.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Applied to u-boot-rockchip, thanks!
Thanks,
- Kever
Change in v3:
- Add some commit message
drivers/pinctrl/rockchip/pinctrl-rockchip-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c index b84b079064..77ac981c40 100644 --- a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c @@ -509,9 +509,8 @@ static const struct pinconf_param rockchip_conf_params[] = { { "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 }, { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
- { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 }, { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
- { "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
- { "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 }, { "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 }, { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
};
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot