From: Baocheng Su baocheng.su@siemens.com
Main differences between the new variant and Advanced PG2:
1. Arduino interface is removed. Instead, an new ASIC is added for communicating with PLC 1200 signal modules. 2. USB 3.0 type A connector is removed, only USB 2.0 type A connector is avaiable. 3. DP interface is tailored down. Instead, to communicate with the PLC 1200 signal modules, a USB 3.0 type B connector is added but the signal is not USB. 4. DDR size is increased to 4 GB. 5. Two sensors are added, one tilt sensor and one light sensor.
Signed-off-by: Baocheng Su baocheng.su@siemens.com [Jan: rebased over OF_UPSTREAM] Signed-off-by: Jan Kiszka jan.kiszka@siemens.com --- arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 5 ++++- .../dts/k3-am6548-iot2050-advanced-sm-u-boot.dtsi | 1 + board/siemens/iot2050/board.c | 15 ++++++++++++++- configs/iot2050_defconfig | 2 +- doc/board/siemens/iot2050.rst | 4 +++- 5 files changed, 23 insertions(+), 4 deletions(-) create mode 120000 arch/arm/dts/k3-am6548-iot2050-advanced-sm-u-boot.dtsi
diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi index 1b31d412b4c..f49d6f262f2 100644 --- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi +++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi @@ -229,7 +229,10 @@ };
fit@380000 { - fit,fdt-list-val = "ti/k3-am6528-iot2050-basic-pg2", "ti/k3-am6548-iot2050-advanced-pg2", "ti/k3-am6548-iot2050-advanced-m2"; + fit,fdt-list-val = "ti/k3-am6528-iot2050-basic-pg2", + "ti/k3-am6548-iot2050-advanced-pg2", + "ti/k3-am6548-iot2050-advanced-m2", + "ti/k3-am6548-iot2050-advanced-sm";
images { bkey-usb3-overlay { diff --git a/arch/arm/dts/k3-am6548-iot2050-advanced-sm-u-boot.dtsi b/arch/arm/dts/k3-am6548-iot2050-advanced-sm-u-boot.dtsi new file mode 120000 index 00000000000..859776d3ffe --- /dev/null +++ b/arch/arm/dts/k3-am6548-iot2050-advanced-sm-u-boot.dtsi @@ -0,0 +1 @@ +k3-am6528-iot2050-basic-pg2-u-boot.dtsi \ No newline at end of file diff --git a/board/siemens/iot2050/board.c b/board/siemens/iot2050/board.c index 9d4c9cf1b31..e6bedc38917 100644 --- a/board/siemens/iot2050/board.c +++ b/board/siemens/iot2050/board.c @@ -174,6 +174,14 @@ static bool board_is_m2(void) strcmp((char *)info->name, "IOT2050-ADVANCED-M2") == 0; }
+static bool board_is_sm(void) +{ + struct iot2050_info *info = IOT2050_INFO_DATA; + + return info->magic == IOT2050_INFO_MAGIC && + strcmp((char *)info->name, "IOT2050-ADVANCED-SM") == 0; +} + static void remove_mmc1_target(void) { char *boot_targets = strdup(env_get("boot_targets")); @@ -189,7 +197,10 @@ static void remove_mmc1_target(void)
static void enable_pcie_connector_power(void) { - set_pinvalue("gpio@601000_17", "P3V3_PCIE_CON_EN", 1); + if (board_is_sm()) + set_pinvalue("gpio@601000_22", "P3V3_PCIE_CON_EN", 1); + else + set_pinvalue("gpio@601000_17", "P3V3_PCIE_CON_EN", 1); udelay(4 * 100); }
@@ -230,6 +241,8 @@ void set_board_info_env(void) fdtfile = "ti/k3-am6548-iot2050-advanced.dtb"; else if (board_is_m2()) fdtfile = "ti/k3-am6548-iot2050-advanced-m2.dtb"; + else if (board_is_sm()) + fdtfile = "ti/k3-am6548-iot2050-advanced-sm.dtb"; else fdtfile = "ti/k3-am6548-iot2050-advanced-pg2.dtb"; } else { diff --git a/configs/iot2050_defconfig b/configs/iot2050_defconfig index 78db6d21099..2624f0cb573 100644 --- a/configs/iot2050_defconfig +++ b/configs/iot2050_defconfig @@ -80,7 +80,7 @@ CONFIG_CMD_TIME=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_UPSTREAM=y -CONFIG_OF_LIST="ti/k3-am6528-iot2050-basic ti/k3-am6528-iot2050-basic-pg2 ti/k3-am6548-iot2050-advanced ti/k3-am6548-iot2050-advanced-pg2 ti/k3-am6548-iot2050-advanced-m2" +CONFIG_OF_LIST="ti/k3-am6528-iot2050-basic ti/k3-am6528-iot2050-basic-pg2 ti/k3-am6548-iot2050-advanced ti/k3-am6548-iot2050-advanced-pg2 ti/k3-am6548-iot2050-advanced-m2 ti/k3-am6548-iot2050-advanced-sm" CONFIG_OF_OVERLAY_LIST="ti/k3-am6548-iot2050-advanced-m2-bkey-usb3 ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie" CONFIG_SPL_MULTI_DTB_FIT=y CONFIG_SPL_OF_LIST="ti/k3-am6528-iot2050-basic" diff --git a/doc/board/siemens/iot2050.rst b/doc/board/siemens/iot2050.rst index d0c0a412097..37b23f6146b 100644 --- a/doc/board/siemens/iot2050.rst +++ b/doc/board/siemens/iot2050.rst @@ -8,7 +8,9 @@ The SIMATIC IOT2050 is an open industrial IoT gateway that is using the TI AM6528 GP (Basic variant) or the AM6548 HS (Advanced variant). The Advanced variant is prepared for secure boot. M.2 Variant also uses the AM6548 HS. Instead of a MiniPCI connector, it comes with two M.2 connectors and can -support 5G/WIFI/BT applications or connect an SSD. +support 5G/WIFI/BT applications or connect an SSD. Compared with the AM6548 +Advanced variant, SM variant removes the Arduino interface, and adds a new +ASIC for communicating with the PLC 1200 signal modules.
The IOT2050 starts only from OSPI. It loads a Siemens-provided bootloader called SE-Boot for the MCU domain (R5F cores), then hands over to ATF and