On Sunday, August 03, 2014 at 09:34:33 AM, Nikita Kiryanov wrote:
MXC SPI driver has a feature whereas a GPIO line can be used as a CS signal. This is set up by joining the CS and GPIO values into a single value using (cs | gpio << 8), and passing it off as a CS value. This breaks the sf probe command, because it is no longer possible to invoke it as sf probe <cs>. Instead, the user must use sf probe <cs | gpio << 8>.
Fix this by introducing a new board function: board_spi_cs_gpio(). When called, board_spi_cs_gpio() will return the gpio number for the cs value it is given.
Cc: Jagannadha Sutradharudu Teki jagannadh.teki@gmail.com Cc: Eric Nelson eric.nelson@boundarydevices.com Cc: Eric Benard eric@eukrea.com Cc: Fabio Estevam fabio.estevam@freescale.com Cc: Tim Harvey tharvey@gateworks.com Cc: Stefano Babic sbabic@denx.de Cc: Tom Rini trini@ti.com Signed-off-by: Nikita Kiryanov nikita@compulab.co.il
Just curious, but is this fixing generic SF code or MXC SPI driver ? I'd think the later, but it's not obvious from neither the description nor the subject. I don't quite understand the problem that you're trying to fix either, what happened, did the user command interface change ?
[...] Best regards, Marek Vasut