This commit enabled support for fitImage on mccmon6 when we switch to DT/DTS (including falcon mode).
Signed-off-by: Lukasz Majewski lukma@denx.de ---
board/liebherr/mccmon6/spl.c | 7 ++++++ configs/mccmon6_nor_defconfig | 8 +++++- configs/mccmon6_sd_defconfig | 6 ++++- include/configs/mccmon6.h | 57 +++++++++++++++++-------------------------- 4 files changed, 42 insertions(+), 36 deletions(-)
diff --git a/board/liebherr/mccmon6/spl.c b/board/liebherr/mccmon6/spl.c index da28a22f84..e1aa23da3e 100644 --- a/board/liebherr/mccmon6/spl.c +++ b/board/liebherr/mccmon6/spl.c @@ -332,6 +332,13 @@ void board_boot_order(u32 *spl_boot_list) } }
+#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + return 0; +} +#endif + #ifdef CONFIG_SPL_OS_BOOT int spl_start_uboot(void) { diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index 770ef9bed6..62e957c0cf 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL=y # CONFIG_CMD_BMODE is not set CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg" # CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOUNCE_BUFFER=y @@ -17,6 +18,11 @@ CONFIG_SPL_TEXT_BASE=0x00908000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_OS_BASE=0x8180000 +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NOR_OFS=0x09600000 +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 CONFIG_CMD_CLK=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y @@ -29,7 +35,7 @@ CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=8000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m@0x0(mccmon6-image.nor),256k@0x40000(u-boot-env.nor),1m@0x80000(u-boot.nor),8m@0x180000(kernel.nor),8m@0x980000(swupdate-kernel.nor),8m@0x1180000(swupdate-rootfs.nor),128k@0x1980000(kernel-dtb.nor),128k@0x19C0000(swupdate-kernel-dtb.nor)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m@0x0(mccmon6-image.nor),256k@0x40000(u-boot-env.nor),1m@0x80000(u-boot.nor),8m@0x180000(kernel.nor),8m@0x980000(swupdate-kernel.nor),8m@0x1180000(swupdate-rootfs.nor)" CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-mccmon6" CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig index 9a11b59738..c72580e362 100644 --- a/configs/mccmon6_sd_defconfig +++ b/configs/mccmon6_sd_defconfig @@ -11,6 +11,7 @@ CONFIG_SPL=y # CONFIG_CMD_BMODE is not set CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg" # CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOUNCE_BUFFER=y @@ -18,6 +19,9 @@ CONFIG_SPL_TEXT_BASE=0x00908000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NOR_OFS=0x09600000 +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 CONFIG_CMD_CLK=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y @@ -30,7 +34,7 @@ CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=8000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m@0x0(mccmon6-image.nor),256k@0x40000(u-boot-env.nor),1m@0x80000(u-boot.nor),8m@0x180000(kernel.nor),8m@0x980000(swupdate-kernel.nor),8m@0x1180000(swupdate-rootfs.nor),128k@0x1980000(kernel-dtb.nor),128k@0x19C0000(swupdate-kernel-dtb.nor)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m@0x0(mccmon6-image.nor),256k@0x40000(u-boot-env.nor),1m@0x80000(u-boot.nor),8m@0x180000(kernel.nor),8m@0x980000(swupdate-kernel.nor),8m@0x1180000(swupdate-rootfs.nor)" CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-mccmon6" CONFIG_ENV_IS_IN_FLASH=y diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index b25aacbf41..c685de6551 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -14,10 +14,6 @@
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000) -#define CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + 0x180000) -#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + 0x1980000) -#define CONFIG_SYS_FDT_SIZE (48 * SZ_1K) #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
/* @@ -28,8 +24,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800) #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80) #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000) -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6q-mccmon.dtb" +#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"
/* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) @@ -61,14 +56,13 @@
#define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200 quiet\0" \ - "fdtfile=imx6q-mccmon6.dtb\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "boot_os=yes\0" \ + "kernelsize=0x300000\0" \ "disable_giga=yes\0" \ "download_kernel=" \ - "tftpboot ${kernel_addr} ${kernel_file};" \ - "tftpboot ${fdt_addr} ${fdtfile};\0" \ + "tftpboot ${loadaddr} ${kernel_file};\0" \ "get_boot_medium=" \ "setenv boot_medium nor;" \ "setexpr.l _src_sbmr1 *0x020d8004;" \ @@ -76,10 +70,7 @@ "if test ${_b_medium} = 40; then " \ "setenv boot_medium sdcard;" \ "fi\0" \ - "kernel_file=uImage\0" \ - "load_kernel=" \ - "load mmc ${bootdev}:${bootpart} ${kernel_addr} uImage;" \ - "load mmc ${bootdev}:${bootpart} ${fdt_addr} ${fdtfile};\0" \ + "kernel_file=fitImage\0" \ "boot_sd=" \ "echo '#######################';" \ "echo '# Factory SDcard Boot #';" \ @@ -90,12 +81,11 @@ "run factory_flash_img;\0" \ "boot_nor=" \ "setenv kernelnor 0x08180000;" \ - "setenv dtbnor 0x09980000;" \ "setenv bootargs console=${console} " \ CONFIG_MTDPARTS_DEFAULT " " \ "root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \ - "cp.l ${dtbnor} ${dtbloadaddr} 0x8000;" \ - "bootm ${kernelnor} - ${dtbloadaddr};\0" \ + "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \ + "bootm ${loadaddr};reset;\0" \ "boot_recovery=" \ "echo '#######################';" \ "echo '# RECOVERY SWU Boot #';" \ @@ -103,14 +93,13 @@ "setenv rootfsloadaddr 0x13000000;" \ "setenv swukernelnor 0x08980000;" \ "setenv swurootfsnor 0x09180000;" \ - "setenv swudtbnor 0x099A0000;" \ "setenv bootargs console=${console} " \ CONFIG_MTDPARTS_DEFAULT " " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}::off root=/dev/ram rw;" \ "cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \ - "cp.l ${swudtbnor} ${dtbloadaddr} 0x8000;" \ - "bootm ${swukernelnor} ${rootfsloadaddr} ${dtbloadaddr};\0" \ + "cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \ + "bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \ "boot_tftp=" \ "echo '#######################';" \ "echo '# TFTP Boot #';" \ @@ -118,7 +107,7 @@ "if run download_kernel; then " \ "setenv bootargs console=${console} " \ "root=/dev/mmcblk0p2 rootwait;" \ - "bootm ${kernel_addr} - ${fdt_addr};" \ + "bootm $loadaddr};reset;" \ "fi\0" \ "bootcmd=" \ "if test -n ${recovery_status}; then " \ @@ -138,13 +127,10 @@ "fi;" \ "fi\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "fdt_addr=0x18000000\0" \ "bootdev=1\0" \ "bootpart=1\0" \ - "kernel_addr=" __stringify(CONFIG_LOADADDR) "\0" \ "netdev=eth0\0" \ "load_addr=0x11000000\0" \ - "dtbloadaddr=0x12000000\0" \ "uboot_file=u-boot.img\0" \ "SPL_file=SPL\0" \ "load_uboot=tftp ${load_addr} ${uboot_file}\0" \ @@ -171,6 +157,7 @@ "device ${mmcdev};" \ "run factory_nor_img;" \ "run factory_eMMC_img;" \ + "run factory_SPL_falcon_setup;" \ "fi\0" \ "factory_eMMC_img="\ "echo 'Update mccmon6 eMMC image'; " \ @@ -192,6 +179,16 @@ "erase ${nor_bank_start} +${nor_img_size};" \ "setexpr nor_img_size ${nor_img_size} / 4; " \ "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \ + "factory_SPL_falcon_setup="\ + "echo 'Write Falcon boot data'; " \ + "setenv kernelnor 0x08180000;" \ + "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \ + "spl export fdt ${loadaddr};" \ + "setenv nor_img_addr ${fdtargsaddr};" \ + "setenv nor_img_size 0x20000;" \ + "setenv nor_bank_start " \ + __stringify(CONFIG_CMD_SPL_NOR_OFS)";" \ + "run nor_update\0" \ "tftp_nor_uboot="\ "echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \ "setenv nor_img_file u-boot.img; " \ @@ -200,22 +197,14 @@ "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \ "run nor_update;" \ "fi\0" \ - "tftp_nor_uImg="\ - "echo 'Update mccmon6 NOR uImage via TFTP'; " \ - "setenv nor_img_file uImage; " \ + "tftp_nor_fitImg="\ + "echo 'Update mccmon6 NOR fitImage via TFTP'; " \ + "setenv nor_img_file fitImage; " \ "setenv nor_img_size 0x500000; " \ "setenv nor_bank_start 0x08180000; " \ "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \ "run nor_update;" \ "fi\0" \ - "tftp_nor_dtb="\ - "echo 'Update mccmon6 NOR DTB via TFTP'; " \ - "setenv nor_img_file imx6q-mccmon6.dtb; " \ - "setenv nor_img_size 0x20000; " \ - "setenv nor_bank_start 0x09980000; " \ - "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \ - "run nor_update;" \ - "fi\0" \ "tftp_nor_img="\ "echo 'Update mccmon6 NOR image via TFTP'; " \ "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \