Remove the last uses of symbol offsets in ARM U-Boot. Remove some needless uses of _TEXT_BASE. Remove all _TEXT_BASE definitions.
Signed-off-by: Albert ARIBAUD albert.u.boot@aribaud.net ---
Changes in v4: - removed mkexynosspl patch, already fixed in 0fcac1ab
Changes in v3: None Changes in v2: - fixed use of _rel_dyn_end instead of _end
README | 6 ------ arch/arm/cpu/arm1136/start.S | 27 --------------------------- arch/arm/cpu/arm1176/start.S | 27 --------------------------- arch/arm/cpu/arm720t/start.S | 26 -------------------------- arch/arm/cpu/arm920t/start.S | 26 -------------------------- arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 14 +------------- arch/arm/cpu/arm926ejs/mxs/start.S | 27 --------------------------- arch/arm/cpu/arm926ejs/start.S | 27 --------------------------- arch/arm/cpu/arm946es/start.S | 26 -------------------------- arch/arm/cpu/arm_intcm/start.S | 26 -------------------------- arch/arm/cpu/armv7/omap3/lowlevel_init.S | 3 --- arch/arm/cpu/armv7/start.S | 23 ----------------------- arch/arm/cpu/ixp/start.S | 26 -------------------------- arch/arm/cpu/pxa/start.S | 27 --------------------------- arch/arm/cpu/sa1100/start.S | 26 -------------------------- arch/arm/lib/board.c | 12 ++++++------ board/armltd/integrator/lowlevel_init.S | 2 +- board/cm4008/flash.c | 2 +- board/cm41xx/flash.c | 2 +- board/mpl/vcma9/lowlevel_init.S | 5 +---- board/mx1ads/lowlevel_init.S | 4 ---- board/samsung/goni/lowlevel_init.S | 3 --- board/samsung/smdk2410/lowlevel_init.S | 5 +---- board/samsung/smdk5250/lowlevel_init.S | 5 +---- board/samsung/smdkc100/lowlevel_init.S | 3 --- board/ti/omap5912osk/lowlevel_init.S | 4 ---- common/board_f.c | 14 +++----------- common/board_r.c | 4 ++-- include/asm-generic/sections.h | 26 +++++++------------------- 29 files changed, 25 insertions(+), 403 deletions(-)
diff --git a/README b/README index 8f0b38c..d9149f3 100644 --- a/README +++ b/README @@ -3676,12 +3676,6 @@ Configuration Settings: its config.mk file). If you find problems enabling this option on your board please report the problem and send patches!
-- CONFIG_SYS_SYM_OFFSETS - This is set by architectures that use offsets for link symbols - instead of absolute values. So bss_start is obtained using an - offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than - directly. You should not need to touch this setting. - - CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) This is set by OMAP boards for the max time that reset should be asserted. See doc/README.omap-reset-time for details on how diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 00d1b30..3e2358e 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -70,32 +70,6 @@ _end_vect: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START @@ -295,7 +269,6 @@ cpu_init_crit: #ifdef CONFIG_SPL_BUILD .align 5 do_hang: - ldr sp, _TEXT_BASE /* use 32 words about stack */ bl hang /* hang and never return */ #else /* !CONFIG_SPL_BUILD */ .align 5 diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index ffd7dd0..ce62011 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -77,33 +77,6 @@ _end_vect: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ - -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index f180eb8..1a34842 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -67,32 +67,6 @@ _pad: .word 0x12345678 /* now 16*4=64 */ ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index a67b659..7bf094a 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -55,32 +55,6 @@ _fiq: .word fiq ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S index e83968f..a9ec81a 100644 --- a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S +++ b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S @@ -26,27 +26,18 @@ #define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL #endif
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init .type lowlevel_init,function lowlevel_init:
- mov r5, pc /* r5 = POS1 + 4 current */ POS1: + adr r5, POS1 /* r5 = POS1 run time */ ldr r0, =POS1 /* r0 = POS1 compile */ - ldr r2, _TEXT_BASE - sub r0, r0, r2 /* r0 = POS1-_TEXT_BASE (POS1 relative) */ sub r5, r5, r0 /* r0 = CONFIG_SYS_TEXT_BASE-1 */ - sub r5, r5, #4 /* r1 = text base - current */
/* memory control configuration 1 */ ldr r0, =SMRDATA ldr r2, =SMRDATA1 - ldr r1, _TEXT_BASE - sub r0, r0, r1 - sub r2, r2, r1 add r0, r0, r5 add r2, r2, r5 0: @@ -149,9 +140,6 @@ PLL_setup_end:
ldr r0, =SMRDATA1 ldr r2, =SMRDATA2 - ldr r1, _TEXT_BASE - sub r0, r0, r1 - sub r2, r2, r1 add r0, r0, r5 add r2, r2, r5 2: diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index 5de2bad..34a0fcb 100644 --- a/arch/arm/cpu/arm926ejs/mxs/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -101,32 +101,6 @@ fiq: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#ifdef CONFIG_SPL_TEXT_BASE - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START @@ -207,6 +181,5 @@ _reset: bx lr
_hang: - ldr sp, _TEXT_BASE /* switch to abort stack */ 1: bl 1b /* hang and never return */ diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 5360f55..0717327 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -102,32 +102,6 @@ _fiq: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START @@ -330,7 +304,6 @@ flush_dcache: #ifdef CONFIG_SPL_BUILD .align 5 do_hang: - ldr sp, _TEXT_BASE /* switch to abort stack */ 1: bl 1b /* hang and never return */ #else /* !CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index e16b088..7d50145 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -71,32 +71,6 @@ _vectors_end: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 5783df1..7404ea7 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -67,32 +67,6 @@ _fiq: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 6f7261b..78577b1 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -17,9 +17,6 @@ #include <asm/arch/clocks_omap3.h> #include <linux/linkage.h>
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - #ifdef CONFIG_SPL_BUILD ENTRY(save_boot_params) ldr r4, =omap3_boot_device diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 6c9b11a..4ff6268 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -63,29 +63,6 @@ _end_vect: * *************************************************************************/
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 82c868a..80ef443 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -80,32 +80,6 @@ _fiq: .word fiq * - jump to second stage */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index d8fb812..ae0d13c 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -84,32 +84,6 @@ _end_vect: ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START @@ -316,7 +290,6 @@ cpu_init_crit: #ifdef CONFIG_SPL_BUILD .align 5 do_hang: - ldr sp, _TEXT_BASE /* use 32 words about stack */ bl hang /* hang and never return */ #else /* !CONFIG_SPL_BUILD */ .align 5 diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 27bcda5..bf80937 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -56,32 +56,6 @@ _fiq: .word fiq ************************************************************************* */
-.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 9c72a53..09879a7 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -105,8 +105,8 @@ static int display_banner(void) { printf("\n\n%s\n\n", version_string); debug("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n", - _TEXT_BASE, - _bss_start_ofs + _TEXT_BASE, _bss_end_ofs + _TEXT_BASE); + (ulong)&_start, + (ulong)&__bss_start, (ulong)&__bss_end); #ifdef CONFIG_MODEM_SUPPORT debug("Modem Support enabled\n"); #endif @@ -277,13 +277,13 @@ void board_init_f(ulong bootflag)
memset((void *)gd, 0, sizeof(gd_t));
- gd->mon_len = _bss_end_ofs; + gd->mon_len = (ulong)&__bss_end - (ulong)_start; #ifdef CONFIG_OF_EMBED /* Get a pointer to the FDT */ gd->fdt_blob = _binary_dt_dtb_start; #elif defined CONFIG_OF_SEPARATE /* FDT is at end of image */ - gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE); + gd->fdt_blob = &_end; #endif /* Allow the early environment to override the fdt address */ gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, @@ -450,7 +450,7 @@ void board_init_f(ulong bootflag)
gd->relocaddr = addr; gd->start_addr_sp = addr_sp; - gd->reloc_off = addr - _TEXT_BASE; + gd->reloc_off = addr - (ulong)&_start; debug("relocation Offset is: %08lx\n", gd->reloc_off); if (new_fdt) { memcpy(new_fdt, gd->fdt_blob, fdt_size); @@ -515,7 +515,7 @@ void board_init_r(gd_t *id, ulong dest_addr) gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
- monitor_flash_len = _end_ofs; + monitor_flash_len = (ulong)&__rel_dyn_end - (ulong)_start;
/* Enable caches */ enable_caches(); diff --git a/board/armltd/integrator/lowlevel_init.S b/board/armltd/integrator/lowlevel_init.S index 389d5e9..0fb42ad 100644 --- a/board/armltd/integrator/lowlevel_init.S +++ b/board/armltd/integrator/lowlevel_init.S @@ -183,7 +183,7 @@ cm_remap:
/* Now 0x00000000 is writeable, replace the vectors */ ldr r0, =_start /* r0 <- start of vectors */ - ldr r2, =_TEXT_BASE /* r2 <- past vectors */ + add r2, r0, #64 /* r2 <- past vectors */ sub r1,r1,r1 /* destination 0x00000000 */
copy_vec: diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c index 2511928..8315a57 100644 --- a/board/cm4008/flash.c +++ b/board/cm4008/flash.c @@ -57,7 +57,7 @@ unsigned long flash_init (void) */ flash_protect (FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + _bss_start_ofs, + CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start), &flash_info[0]);
return size; diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c index 2511928..8315a57 100644 --- a/board/cm41xx/flash.c +++ b/board/cm41xx/flash.c @@ -57,7 +57,7 @@ unsigned long flash_init (void) */ flash_protect (FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + _bss_start_ofs, + CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start), &flash_info[0]);
return size; diff --git a/board/mpl/vcma9/lowlevel_init.S b/board/mpl/vcma9/lowlevel_init.S index b889cf9..cca9c0c 100644 --- a/board/mpl/vcma9/lowlevel_init.S +++ b/board/mpl/vcma9/lowlevel_init.S @@ -197,13 +197,10 @@ #define REFCNT_266 0 /**************************************/
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: /* use r0 to relocate DATA read/write to flash rather than memory ! */ - ldr r0, _TEXT_BASE + ldr r0, =CONFIG_SYS_TEXT_BASE ldr r13, =BWSCON
/* enable minimal access to PLD */ diff --git a/board/mx1ads/lowlevel_init.S b/board/mx1ads/lowlevel_init.S index d1e472a..3e713cc 100644 --- a/board/mx1ads/lowlevel_init.S +++ b/board/mx1ads/lowlevel_init.S @@ -16,10 +16,6 @@ #define SDCTL0 0x221000 #define SDCTL1 0x221004
- -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: /* memory controller init */ diff --git a/board/samsung/goni/lowlevel_init.S b/board/samsung/goni/lowlevel_init.S index 726211a..d52bc09 100644 --- a/board/samsung/goni/lowlevel_init.S +++ b/board/samsung/goni/lowlevel_init.S @@ -22,9 +22,6 @@ * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on */
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: mov r11, lr diff --git a/board/samsung/smdk2410/lowlevel_init.S b/board/samsung/smdk2410/lowlevel_init.S index c7b78fd..5de04f1 100644 --- a/board/samsung/smdk2410/lowlevel_init.S +++ b/board/samsung/smdk2410/lowlevel_init.S @@ -110,16 +110,13 @@ #define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ /**************************************/
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: /* memory control configuration */ /* make r0 relative the current location so that it */ /* reads SMRDATA out of FLASH rather than memory ! */ ldr r0, =SMRDATA - ldr r1, _TEXT_BASE + ldr r1, =CONFIG_SYS_TEXT_BASE sub r0, r0, r1 ldr r1, =BWSCON /* Bus Width Status Controller */ add r2, r0, #13*4 diff --git a/board/samsung/smdk5250/lowlevel_init.S b/board/samsung/smdk5250/lowlevel_init.S index 9003e2d..8e389cc 100644 --- a/board/samsung/smdk5250/lowlevel_init.S +++ b/board/samsung/smdk5250/lowlevel_init.S @@ -10,9 +10,6 @@ #include <version.h> #include <asm/arch/cpu.h>
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init:
@@ -47,7 +44,7 @@ lowlevel_init: ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ bic r1, pc, r0 /* pc <- current addr of code */ /* r1 <- unmasked bits of pc */ - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ + ldr r2, =CONFIG_SYS_TEXT_BASE /* r2 <- original base addr in ram */ bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ cmp r1, r2 /* compare r1, r2 */ beq 1f /* r0 == r1 then skip sdram init */ diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S index 4df0974..65e6b7a 100644 --- a/board/samsung/smdkc100/lowlevel_init.S +++ b/board/samsung/smdkc100/lowlevel_init.S @@ -17,9 +17,6 @@ * r5 has zero always */
-_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: mov r9, lr diff --git a/board/ti/omap5912osk/lowlevel_init.S b/board/ti/omap5912osk/lowlevel_init.S index cad0a5a..e05a1c7 100644 --- a/board/ti/omap5912osk/lowlevel_init.S +++ b/board/ti/omap5912osk/lowlevel_init.S @@ -18,10 +18,6 @@ #include <./configs/omap1510.h> #endif
- -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - .globl lowlevel_init lowlevel_init:
diff --git a/common/board_f.c b/common/board_f.c index f0664bc..15f8b79 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -149,13 +149,9 @@ static int display_text_info(void) #ifndef CONFIG_SANDBOX ulong bss_start, bss_end;
-#ifdef CONFIG_SYS_SYM_OFFSETS - bss_start = _bss_start_ofs + _TEXT_BASE; - bss_end = _bss_end_ofs + _TEXT_BASE; -#else bss_start = (ulong)&__bss_start; bss_end = (ulong)&__bss_end; -#endif + debug("U-Boot code: %08X -> %08lX BSS: -> %08lX\n", CONFIG_SYS_TEXT_BASE, bss_start, bss_end); #endif @@ -279,8 +275,8 @@ static int zero_global_data(void)
static int setup_mon_len(void) { -#ifdef CONFIG_SYS_SYM_OFFSETS - gd->mon_len = _bss_end_ofs; +#ifdef __ARM__ + gd->mon_len = (ulong)&__bss_end - (ulong)_start; #elif defined(CONFIG_SANDBOX) gd->mon_len = (ulong)&_end - (ulong)_init; #else @@ -362,11 +358,7 @@ static int setup_fdt(void) gd->fdt_blob = _binary_dt_dtb_start; #elif defined CONFIG_OF_SEPARATE /* FDT is at end of image */ -# ifdef CONFIG_SYS_SYM_OFFSETS - gd->fdt_blob = (void *)(_end_ofs + CONFIG_SYS_TEXT_BASE); -# else gd->fdt_blob = (ulong *)&_end; -# endif #elif defined(CONFIG_OF_HOSTFILE) if (read_fdt_from_file()) { puts("Failed to read control FDT\n"); diff --git a/common/board_r.c b/common/board_r.c index 86ca1cb..9d84d14 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -128,8 +128,8 @@ __weak int fixup_cpu(void)
static int initr_reloc_global_data(void) { -#ifdef CONFIG_SYS_SYM_OFFSETS - monitor_flash_len = _end_ofs; +#ifdef __ARM__ + monitor_flash_len = _end - __image_copy_start; #elif !defined(CONFIG_SANDBOX) monitor_flash_len = (ulong)&__init_end - gd->relocaddr; #endif diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h index 7e1eb4b..458952f 100644 --- a/include/asm-generic/sections.h +++ b/include/asm-generic/sections.h @@ -63,28 +63,16 @@ extern char __image_copy_end[]; extern void _start(void);
/* - * ARM needs to use offsets for symbols, since the values of some symbols - * are not resolved prior to relocation (and are just 0). Maybe this can be - * resolved, or maybe other architectures are similar, iwc this should be - * promoted to an architecture option. + * ARM defines its symbols as char[]. Other arches define them as ulongs. */ #ifdef CONFIG_ARM -#define CONFIG_SYS_SYM_OFFSETS -#endif - -#ifdef CONFIG_SYS_SYM_OFFSETS -/* Start/end of the relocation entries, as an offset from _start */ -extern ulong _rel_dyn_start_ofs; -extern ulong _rel_dyn_end_ofs; - -/* End of the region to be relocated, as an offset form _start */ -extern ulong _image_copy_end_ofs;
-extern ulong _bss_start_ofs; /* BSS start relative to _start */ -extern ulong _bss_end_ofs; /* BSS end relative to _start */ -extern ulong _end_ofs; /* end of image relative to _start */ - -extern ulong _TEXT_BASE; /* code start */ +extern char __bss_start[]; +extern char __bss_end[]; +extern char __image_copy_start[]; +extern char __image_copy_end[]; +extern char __rel_dyn_start[]; +extern char __rel_dyn_end[];
#else /* don't use offsets: */