On Wed, Feb 23, 2022 at 3:21 PM Vladimir Oltean vladimir.oltean@nxp.com wrote:
A DM_ETH driver may use phy_connect() towards a PHY address on an MDIO bus which is not specified in the device tree, as evidenced by:
pfe_eth_probe -> pfe_phy_configure -> phy_connect
When this happens, the PHY will have an invalid OF node.
The dp83867_config() method has extra initialization steps which are bypassed when the PHY lacks an OF node, which is undesirable because it will lead to broken networking. Allow the rest of the code to run.
Fixes: 085445ca4104 ("net: phy: ti: Allow the driver to be more configurable") Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com
drivers/net/phy/dp83867.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index eada4541c9c3..49978d0f25f3 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -158,7 +158,7 @@ static int dp83867_of_init(struct phy_device *phydev)
node = phy_get_ofnode(phydev); if (!ofnode_valid(node))
return -EINVAL;
return 0; /* Optional configuration */ ret = ofnode_read_u32(node, "ti,clk-output-sel",-- 2.25.1
Reviewed-by: Ramon Fried rfried.dev@gmail.com