On 26 July 2016 at 10:44, Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com wrote:
From: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com
Add Quad mode support for xilinx spi driver Inform the spi framework about quad mode capability by reading it from devicetree.
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com
drivers/spi/xilinx_spi.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index a951a77..3e01c66 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -21,6 +21,8 @@ #include <spi.h> #include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
/*
@@ -82,6 +84,8 @@ #define CONFIG_SYS_XILINX_SPI_LIST { CONFIG_SYS_SPI_BASE } #endif
+#define XILINX_SPI_QUAD_MODE 2
/* xilinx spi register set */ struct xilinx_spi_regs { u32 __space0__[7]; @@ -109,6 +113,22 @@ struct xilinx_spi_priv { };
static unsigned long xilinx_spi_base_list[] = CONFIG_SYS_XILINX_SPI_LIST;
+static int xilinx_spi_child_pre_probe(struct udevice *bus) +{
struct spi_slave *slave = dev_get_parent_priv(bus);struct udevice *dev = dev_get_parent(bus);int spimode;spimode = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "xlnx,spi-mode",-1);if (spimode == XILINX_SPI_QUAD_MODE)slave->op_mode_rx = SPI_OPM_RX_QOF;
This is wrong, use platdata in spi-uclass that in-turn detect the mode from dt and SPI_OPM_RX_QOF is never exit.
thanks!