On Tue, Dec 15, 2015 at 6:06 PM, Alexey Brodkin Alexey.Brodkin@synopsys.com wrote:
Current implementation of disabled relocation only works for EFI.
In case of GD_FLG_SKIP_RELOC jump_to_copy() will return instead of jumping further in board_init_r() etc. And jump_to_copy() being the last call in init_sequence_f when returning simply triggers hang() in board_init_f(). Well for everything except ARM, SANDBOX and EFI_APP.
Not sure why ARM and SANBOX are here - I would assume it's all on purpose but as for EFI_APP this is an essential need for getting out of board_init_f() and jumping in board_init_r() immediately afterwards, see efi_main().
But what if in case of no relocation we jump in board_init_r() right from jump_to_copy()? In that case we remove one ifdef from board_init_f() and leave a chance to seamlessly re-use disabled relocation for other (non-EFI) cases.
Signed-off-by: Alexey Brodkin abrodkin@synopsys.com
Note I didn't test it for EFI because I don't know how to do that in simulation, please let me know if there's a simple way to do it.
Does doc/README.efi not help?
But I did test it for ARC boards (with additional patches) that enable disabled relocation - these patches to follow once something similar to my proposal here is implemented.
Reviewed-by: Bin Meng bmeng.cn@gmail.com
Tested on QEMU, booting u-boot-app.efi with EFI firmware Tested-by: Bin Meng bmeng.cn@gmail.com
common/board_f.c | 11 ++++++++--- lib/efi/efi_app.c | 2 +- 2 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c index eac7c5e..2d60ed9 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -720,8 +720,14 @@ static int setup_reloc(void)
static int jump_to_copy(void) {
/** In case of no relocation nothing to do between "running from flash"* (init_f) and "running from ram" (init_r), so just jumping in* board_init_r().*/ if (gd->flags & GD_FLG_SKIP_RELOC)
return 0;
board_init_r((gd_t *)gd, gd->relocaddr);/* * x86 is special, but in a nice way. It uses a trampoline which * enables the dcache if possible.@@ -1017,8 +1023,7 @@ void board_init_f(ulong boot_flags) if (initcall_run_list(init_sequence_f)) hang();
-#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \
!defined(CONFIG_EFI_APP)+#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) /* NOTREACHED - jump_to_copy() does not return */ hang(); #endif diff --git a/lib/efi/efi_app.c b/lib/efi/efi_app.c index 452ab5d..5e41b7f 100644 --- a/lib/efi/efi_app.c +++ b/lib/efi/efi_app.c @@ -123,7 +123,7 @@ efi_status_t efi_main(efi_handle_t image, struct efi_system_table *sys_table) printf("starting\n");
board_init_f(GD_FLG_SKIP_RELOC);
board_init_r(NULL, 0);
/* board_init_r() is called in the end of board_init_f() */ free_memory(priv); return EFI_SUCCESS;--
Regards, Bin