Just preparing for upcoming cleaning.
The board-specific linker script board/vpac270/u-boot-spl.lds has been touched to avoid build error. It does not change the size of spl/u-boot-spl.bin for this board, so it should be OK.
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Reviewed-by: Tom Rini trini@konsulko.com Reviewed-by: Stefano Babic sbabic@denx.de Reviewed-by: Simon Glass sjg@chromium.org ---
Changes in v3: None Changes in v2: - Do not delete vpac270 board. Instead, change board/vpac270/u-boot-spl.lds
board/vpac270/u-boot-spl.lds | 2 +- drivers/Makefile | 37 +++++++++++++++++++++++++++++++++++++ scripts/Makefile.spl | 31 +------------------------------ 3 files changed, 39 insertions(+), 31 deletions(-)
diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds index a10ea71..954afb9 100644 --- a/board/vpac270/u-boot-spl.lds +++ b/board/vpac270/u-boot-spl.lds @@ -23,7 +23,7 @@ SECTIONS arch/arm/cpu/pxa/start.o (.text*) arch/arm/lib/built-in.o (.text*) board/vpac270/built-in.o (.text*) - drivers/mtd/onenand/built-in.o (.text*) + drivers/built-in.o (.text*) }
diff --git a/drivers/Makefile b/drivers/Makefile index 5a35148..a24c5f5 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -1,3 +1,38 @@ +ifdef CONFIG_SPL_BUILD + +obj-$(CONFIG_SPL_CLK_SUPPORT) += clk/ +obj-$(CONFIG_SPL_DM) += core/ +obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/ +obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/ +obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/ +obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ +obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ddr/marvell/a38x/ +obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/ +obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/ +obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/ +obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/ +obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/ +obj-$(CONFIG_SPL_LED_SUPPORT) += led/ +obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/ +obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/ +obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/ +obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/ +obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ +obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/ +obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/ +obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ +obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ +obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ +obj-$(CONFIG_SPL_RAM_SUPPORT) += ram/ +obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ +obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/ +obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/ +obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/ +obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ +obj-$(CONFIG_SPL_SATA_SUPPORT) += block/ + +else + obj-$(CONFIG_CLK) += clk/ obj-$(CONFIG_DM) += core/ obj-$(CONFIG_DM_DEMO) += demo/ @@ -27,3 +62,5 @@ obj-y += input/ # SOC specific infrastructure drivers. obj-y += soc/ obj-y += thermal/ + +endif diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 239ee48..58442f1 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -54,40 +54,11 @@ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/ libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ -libs-$(CONFIG_SPL_CLK_SUPPORT) += drivers/clk/ -libs-$(CONFIG_SPL_DM) += drivers/core/ -libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/ -libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/ -libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/ -libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/ -libs-$(CONFIG_SYS_MVEBU_DDR_A38X) += drivers/ddr/marvell/a38x/ -libs-$(CONFIG_SYS_MVEBU_DDR_AXP) += drivers/ddr/marvell/axp/ -libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/ -libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/ -libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/ -libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/ +libs-y += drivers/ libs-y += fs/ -libs-$(CONFIG_SPL_LED_SUPPORT) += drivers/led/ libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/ -libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/ -libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/regulator/ -libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/ -libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/ -libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/ -libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/ -libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/ libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/ libs-$(CONFIG_SPL_NET_SUPPORT) += net/ -libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/ -libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/ -libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/ -libs-$(CONFIG_SPL_RAM_SUPPORT) += drivers/ram/ -libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/ -libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/ -libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/ -libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/ -libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/ -libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
head-y := $(addprefix $(obj)/,$(head-y)) libs-y := $(addprefix $(obj)/,$(libs-y))