Hi, I built u-boot 1.3.2 for my new M5272C3. Everything looks fine. I can program the u-boot image into M5272C3, and then boot into u-boot, but I cannot see the Ethernet interface working. I set the environment variables of U-Boot as below,
-> setenv ipaddr 192.168.1.22 -> setenv serverip 192.168.1.20 -> setenv gatewayip 192.168.1.1
But I got the messages below for the ping command,
-> ping 192.168.1.1 Using FEC0 device TX timeout fec_recv[216] err: 882 TX timeout ping failed; host 192.168.1.1 is not alive
Even I ping 192.168.1.22, I got the same error messages. Do you have any idea why FEC0 doesn't work? There is no any problem when I use the network commands with dBUG monitor.
Thank you! Humphrey
Ask a question on any topic and get answers from real people. Go to Yahoo! Answers and share what you know at http://ca.answers.yahoo.com