On 11/07/2011 10:04 AM, Stefano Babic wrote:
On 11/07/2011 08:59 AM, Helmut Raiger wrote:
On 11/02/2011 08:02 AM, Helmut Raiger wrote:
On 10/27/2011 02:19 PM, Helmut Raiger wrote:
This patch modifies mxcmmc.c to be used not only by i.MX27 but also by i.MX31 boards. Both use the same SD controller, but have different clock set-ups. The i.MX27 imx_get_XXXclock functions are made static to generic.c and a public mxc_get_clock() function is provided. Pins, base address and prototypes for an i.MX31 specific board_init_mmc() are provided. Some of the i.MX27 clock getters are unused and marked as such to avoid warnings (./MAKEALL -s mx27), but the code was left in for future use.
Signed-off-by: Helmut Raigerhelmut.raiger@hale.at
I just re-titled the patch to make it visible for the imx community, it concerns i.MX27 and i.MX31, so mmc: is probably the wrong category anyway.
Helmut
Hi Helmut,
Anything amiss? Helmut
I have seen your message regarding your patch "tt01: add MMC and video support" asking to ignore it, and I have ignored this patch, too....
I will review it soo - however, there is no use case for MMC on the i.MX31 until you submit a patch for your board supporting MMC.
Best regards, Stefano Babic
Hi,
Stefano I don't want to be pushing, but this sits here since 3 weeks, can I be of some help? Concerning the TT-01 extension patch, I meant it has to wait until this patch is through. So if you don't like the idea of having a patch no-one is using, simply apply both of them. For your reference:
http://patchwork.ozlabs.org/patch/122139/ this one http://patchwork.ozlabs.org/patch/122176/ board support extension
Thanks in advance, Helmut
Helmut
-- Scanned by MailScanner.