11 Jul
2017
11 Jul
'17
2:41 p.m.
On Tue, Jul 04, 2017 at 06:24:43PM +0200, Patrice Chotard wrote:
From: Patrice Chotard patrice.chotard@st.com
To set wait state, a hard coded value is used instead of using latency parameter. stm32_flash_latency_cfg() is currently used in arch/arm/mach-stm32/stm32f4/clock.c and in drivers/clk/clk_stm32f7.c with, in both case, "5" as parameter.
Signed-off-by: Patrice Chotard patrice.chotard@st.com
Applied to u-boot/master, thanks!
--
Tom