On 8/13/20 9:23 AM, Patrice CHOTARD wrote:
Hi Patrick
On 7/31/20 4:31 PM, Patrick Delaunay wrote:
Use CONFIG_IS_ENABLED to prevent ifdef in set_dfu_alt_inf.
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com
board/st/common/stm32mp_dfu.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
Applied on u-boot-stm/master
Thanks
diff --git a/board/st/common/stm32mp_dfu.c b/board/st/common/stm32mp_dfu.c index 0cda9196f9..2fb307efe4 100644 --- a/board/st/common/stm32mp_dfu.c +++ b/board/st/common/stm32mp_dfu.c @@ -113,11 +113,13 @@ void set_dfu_alt_info(char *interface, char *devstr) snprintf(buf, DFU_ALT_BUF_LEN, "ram 0=%s", CONFIG_DFU_ALT_RAM0);
- if (!uclass_get_device(UCLASS_MMC, 0, &dev))
board_get_alt_info_mmc(dev, buf);
- if (CONFIG_IS_ENABLED(MMC)) {
if (!uclass_get_device(UCLASS_MMC, 0, &dev))board_get_alt_info_mmc(dev, buf);
- if (!uclass_get_device(UCLASS_MMC, 1, &dev))
board_get_alt_info_mmc(dev, buf);
if (!uclass_get_device(UCLASS_MMC, 1, &dev))board_get_alt_info_mmc(dev, buf);}
if (CONFIG_IS_ENABLED(MTD)) { /* probe all MTD devices */
@@ -139,12 +141,12 @@ void set_dfu_alt_info(char *interface, char *devstr) board_get_alt_info_mtd(mtd, buf); }
-#ifdef CONFIG_DFU_VIRT
- strncat(buf, "&virt 0=OTP", DFU_ALT_BUF_LEN);
- if (IS_ENABLED(CONFIG_DFU_VIRT)) {
strncat(buf, "&virt 0=OTP", DFU_ALT_BUF_LEN);
- if (IS_ENABLED(CONFIG_PMIC_STPMIC1))
strncat(buf, "&virt 1=PMIC", DFU_ALT_BUF_LEN);-#endif
if (IS_ENABLED(CONFIG_PMIC_STPMIC1))strncat(buf, "&virt 1=PMIC", DFU_ALT_BUF_LEN);}
env_set("dfu_alt_info", buf); puts("DFU alt info setting: done\n");
Reviewed-by: Patrice Chotard patrice.chotard@st.com
Thanks
Patrice _______________________________________________ Uboot-stm32 mailing list Uboot-stm32@st-md-mailman.stormreply.com https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32