The only UART that is garunteed on Ventana boards is UART2 (serial-console).
Remove UART1 pinmux as that it is not consistent across all Ventana boards and U-Boot doesn't need it.
Signed-off-by: Tim Harvey tharvey@gateworks.com --- board/gateworks/gw_ventana/common.c | 7 ------- 1 file changed, 7 deletions(-)
diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 41fe8dc240..f577bdbdfb 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -18,12 +18,6 @@
#include "common.h"
-/* UART1: Function varies per baseboard */ -static iomux_v3_cfg_t const uart1_pads[] = { - IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), -}; - /* UART2: Serial Console */ static iomux_v3_cfg_t const uart2_pads[] = { IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), @@ -32,7 +26,6 @@ static iomux_v3_cfg_t const uart2_pads[] = {
void setup_iomux_uart(void) { - SETUP_IOMUX_PADS(uart1_pads); SETUP_IOMUX_PADS(uart2_pads); }