-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of amruth vamadev Sent: Thursday, December 29, 2011 5:09 PM To: u-boot@lists.denx.de Subject: [U-Boot] Support for P1011 CCSRBAR
Hi
Can you please give more details here, what you are trying to do.
I am trying to access CCSRBAR using address 0xffe00000.I know this is not the default address for freescale P1011 board,
Default is ff700000, if it is not relocated. If you are using u-boot, from open source or FSL BSP, it will relocate it to ffe00000. flash address is mapped to
0xff000000 and the flash is not programmed with u-boot.I am running out of RAM and have issues accessing CCSRBAR.
How are u running via RAM? Can you give more details here. Can we relocate CCSRBAR to
someother address, but we need to access via RAM.
We can relocate CCSRBAR to any address, it should not matter if you are accessing it via RAM or somewhere else. Please let me know if
anybody faced similar issue.
Regards Poonam
Thanks Amruth p.v _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot