Hi All,
I was just testing out the db-88f6820-amc on u-boot#master and found that the SPL can't fetch then next stage from SPI.
U-Boot SPL 2019.04-rc2-00139-g91c56ed98da7 (Mar 01 2019 - 10:26:26 +1300) High speed PHY - Version: 2.0 Detected Device ID 6820 board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 5 | PCIe0 | | 4 | 0 | SGMII1 | | 5 | 0 | SGMII2 | -------------------------------- PCIe, Idx 0: detected no link High speed PHY - Ended Successfully mv_ddr: mv_ddr-armada-18.09.2 DDR3 Training Sequence - Switching XBAR Window to FastPath Window mv_ddr: completed successfully Trying to boot from SPI SPI probe failed. SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ###
I haven't had time to bisect this yet but I wondered if this was related to the recent spi changes (this board uses SPI1 so maybe that's the corner case). I may also potentially be fixed by the SPI Kconfig series that is floating around on the list.