Reviewed-by: Igor Opaniuk igor.opaniuk@toradex.com
On Fri, Mar 29, 2019 at 1:41 PM Marcel Ziswiler marcel@ziswiler.com wrote:
From: Philippe Schenker philippe.schenker@toradex.com
Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the SOC to request for a lower voltage during sleep. This is necessary because the voltage is changing too slow for the SOC to wake up properly.
Signed-off-by: Philippe Schenker philippe.schenker@toradex.com Acked-by: Marcel Ziswiler marcel.ziswiler@toradex.com
board/toradex/colibri-imx6ull/colibri-imx6ull.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c index b6f45edb86..f1d5cc6655 100644 --- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c +++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c @@ -50,6 +50,8 @@ DECLARE_GLOBAL_DATA_PTR; #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ PAD_CTL_DSE_48ohm)
+#define MX6_PAD_SNVS_PMIC_STBY_REQ_ADDR 0x2290040
#define NAND_PAD_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP) @@ -331,6 +333,14 @@ int board_late_init(void) env_set("variant", "-wifi"); #endif
/** Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the* SOC to request for a lower voltage during sleep. This is necessary* because the voltage is changing too slow for the SOC to wake up* properly.*/__raw_writel(0x8080, MX6_PAD_SNVS_PMIC_STBY_REQ_ADDR);#ifdef CONFIG_CMD_BMODE add_board_boot_modes(board_boot_modes);
#endif
2.20.1
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot