From: Andrej Rosano andrej@inversepath.com
Hello,
this series adds support for USB armory board. The patches are prepared against imx tree as it uses the new arch/board approach.
The first patch add introduces the arch/board approach for mx5, as already done for mx6.
The second patch adds basic support for USB armory board and is an updated version (v4) with the modifications described bellow.
Best Regards, Andrej
Changes for v4: - Remove ifdef for CONFIG_FSL_ESDHC as it must always be present - Remove explicit GPIO input setup (all GPIO are input after reset) - Remove dummy board_late_init() and CONFIG_BOARD_LATE_INIT - Remove CONFIG_BOOTARGS - Fix compiling errors due to config_distro_bootcmd.h inclusion position
Changes for v3: - Add config_distro support
Changes for v2: - Fix double print_cpuinfo() call - Fix CONFIG_BOOTCOMMAND typo - Fix CONFIG_SYS_FSL_ESDHC_NUM to 1
Andrej Rosano (2): ARM: mx5: move to a standard arch/board approach ARM: mx5: add support for USB armory board
Andrej Rosano (2): ARM: mx5: move to a standard arch/board approach ARM: mx5: add support for USB armory board
arch/arm/Kconfig | 6 + arch/arm/cpu/armv7/mx5/Kconfig | 27 ++ board/inversepath/usbarmory/Kconfig | 15 ++ board/inversepath/usbarmory/MAINTAINERS | 6 + board/inversepath/usbarmory/Makefile | 10 + board/inversepath/usbarmory/imximage.cfg | 82 ++++++ board/inversepath/usbarmory/usbarmory.c | 419 ++++++++++++++++++++++++++++++ configs/usbarmory_defconfig | 3 + include/configs/usbarmory.h | 126 +++++++++ 9 files changed, 694 insertions(+) create mode 100644 arch/arm/cpu/armv7/mx5/Kconfig create mode 100644 board/inversepath/usbarmory/Kconfig create mode 100644 board/inversepath/usbarmory/MAINTAINERS create mode 100644 board/inversepath/usbarmory/Makefile create mode 100644 board/inversepath/usbarmory/imximage.cfg create mode 100644 board/inversepath/usbarmory/usbarmory.c create mode 100644 configs/usbarmory_defconfig create mode 100644 include/configs/usbarmory.h