From: xiefei xf_hqu@163.com
Due to the need to read the register value before switching to hs mode, the standard protocol does not explicitly specify that the setting before switching to hs mode is in legacy mode. Therefore, the code at this point may cause communication abnormalities between the host and card
Signed-off-by: xiefei xf_hqu@163.com --- drivers/mmc/mmc.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 1af6af82e6..915f446973 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -2138,7 +2138,6 @@ static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps) mmc_set_card_speed(mmc, MMC_HS, true); else #endif - mmc_set_clock(mmc, mmc->legacy_speed, MMC_CLK_ENABLE);
for_each_mmc_mode_by_pref(card_caps, mwt) { for_each_supported_width(card_caps & mwt->widths,