Re: [PATCH] mtd: rawnand: mxs_nand: Fix use_minimum_ecc for spl driver

On 22/03/29 04:38PM, Ye Li wrote:

Because mxs_nand_spl driver does not support DM, to use the minimum ECC layout, it needs to handle the CONFIG_NAND_MXS_USE_MINIMUM_ECC.

Yes, spl also need the CONFIG_NAND_MXS_USE_MINIMUM_ECC flag.

Reviewed-by: Han Xu han.xu@nxp.com

Signed-off-by: Ye Li ye.li@nxp.com

drivers/mtd/nand/raw/mxs_nand.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c index ee5d7fd..28e189a 100644 --- a/drivers/mtd/nand/raw/mxs_nand.c +++ b/drivers/mtd/nand/raw/mxs_nand.c @@ -1380,6 +1380,10 @@ int mxs_nand_init_spl(struct nand_chip *nand) else nand_info->max_ecc_strength_supported = 40;

+#ifdef CONFIG_NAND_MXS_USE_MINIMUM_ECC

• nand_info->use_minimum_ecc = true;

+#endif

• err = mxs_nand_alloc_buffers(nand_info); if (err) return err;

-- 2.7.4