From: Fabio Estevam fabio.estevam@freescale.com
Instead of having the same PAD control definition in each MX6 variant pin file, place it into a common location.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 27 --------------------------- arch/arm/include/asm/arch-mx6/mx6q_pins.h | 27 --------------------------- arch/arm/include/asm/imx-common/iomux-v3.h | 26 ++++++++++++++++++++++++++ 3 files changed, 26 insertions(+), 54 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h index 9846f1b..0ed12f3 100644 --- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -22,33 +22,6 @@
#include <asm/imx-common/iomux-v3.h>
-/* Use to set PAD control */ -#define PAD_CTL_HYS (1 << 16) -#define PAD_CTL_PUS_100K_DOWN (0 << 14) -#define PAD_CTL_PUS_47K_UP (1 << 14) -#define PAD_CTL_PUS_100K_UP (2 << 14) -#define PAD_CTL_PUS_22K_UP (3 << 14) - -#define PAD_CTL_PUE (1 << 13) -#define PAD_CTL_PKE (1 << 12) -#define PAD_CTL_ODE (1 << 11) -#define PAD_CTL_SPEED_LOW (1 << 6) -#define PAD_CTL_SPEED_MED (2 << 6) -#define PAD_CTL_SPEED_HIGH (3 << 6) -#define PAD_CTL_DSE_DISABLE (0 << 3) -#define PAD_CTL_DSE_240ohm (1 << 3) -#define PAD_CTL_DSE_120ohm (2 << 3) -#define PAD_CTL_DSE_80ohm (3 << 3) -#define PAD_CTL_DSE_60ohm (4 << 3) -#define PAD_CTL_DSE_48ohm (5 << 3) -#define PAD_CTL_DSE_40ohm (6 << 3) -#define PAD_CTL_DSE_34ohm (7 << 3) -#define PAD_CTL_SRE_FAST (1 << 0) -#define PAD_CTL_SRE_SLOW (0 << 0) - -#define IOMUX_CONFIG_SION 0x10 -#define NO_MUX_I 0 -#define NO_PAD_I 0 enum { MX6_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0), MX6_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0), diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h index 1c1c008..02a40d4 100644 --- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h @@ -24,33 +24,6 @@
#include <asm/imx-common/iomux-v3.h>
-/* Use to set PAD control */ -#define PAD_CTL_HYS (1 << 16) -#define PAD_CTL_PUS_100K_DOWN (0 << 14) -#define PAD_CTL_PUS_47K_UP (1 << 14) -#define PAD_CTL_PUS_100K_UP (2 << 14) -#define PAD_CTL_PUS_22K_UP (3 << 14) - -#define PAD_CTL_PUE (1 << 13) -#define PAD_CTL_PKE (1 << 12) -#define PAD_CTL_ODE (1 << 11) -#define PAD_CTL_SPEED_LOW (1 << 6) -#define PAD_CTL_SPEED_MED (2 << 6) -#define PAD_CTL_SPEED_HIGH (3 << 6) -#define PAD_CTL_DSE_DISABLE (0 << 3) -#define PAD_CTL_DSE_240ohm (1 << 3) -#define PAD_CTL_DSE_120ohm (2 << 3) -#define PAD_CTL_DSE_80ohm (3 << 3) -#define PAD_CTL_DSE_60ohm (4 << 3) -#define PAD_CTL_DSE_48ohm (5 << 3) -#define PAD_CTL_DSE_40ohm (6 << 3) -#define PAD_CTL_DSE_34ohm (7 << 3) -#define PAD_CTL_SRE_FAST (1 << 0) -#define PAD_CTL_SRE_SLOW (0 << 0) - -#define NO_MUX_I 0 -#define NO_PAD_I 0 - enum { MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0), MX6_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0), diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index c34bb76..32126a7 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -97,6 +97,32 @@ typedef u64 iomux_v3_cfg_t;
#define MUX_CONFIG_SION (0x1 << 4)
+#define PAD_CTL_HYS (1 << 16) +#define PAD_CTL_PUS_100K_DOWN (0 << 14) +#define PAD_CTL_PUS_47K_UP (1 << 14) +#define PAD_CTL_PUS_100K_UP (2 << 14) +#define PAD_CTL_PUS_22K_UP (3 << 14) + +#define PAD_CTL_PUE (1 << 13) +#define PAD_CTL_PKE (1 << 12) +#define PAD_CTL_ODE (1 << 11) +#define PAD_CTL_SPEED_LOW (1 << 6) +#define PAD_CTL_SPEED_MED (2 << 6) +#define PAD_CTL_SPEED_HIGH (3 << 6) +#define PAD_CTL_DSE_DISABLE (0 << 3) +#define PAD_CTL_DSE_240ohm (1 << 3) +#define PAD_CTL_DSE_120ohm (2 << 3) +#define PAD_CTL_DSE_80ohm (3 << 3) +#define PAD_CTL_DSE_60ohm (4 << 3) +#define PAD_CTL_DSE_48ohm (5 << 3) +#define PAD_CTL_DSE_40ohm (6 << 3) +#define PAD_CTL_DSE_34ohm (7 << 3) +#define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) + +#define NO_MUX_I 0 +#define NO_PAD_I 0 + int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, unsigned count);