[U-Boot] ums command using dwc3

Hello Marek Vasut

I am working on u-boot 2016.01. Using a platform with DWC3 USB 3.0 controller.

My objective is to configure the USB in device mode and it gets exposed to an X86 as a USB mass storage. The memory exposed would be a SATA disk.

Is it possible to do it via ums command?

I gave it some try on a Freescale platform; but basic enumeration also does not start. We get a Connect Done and a setup packet.

Any pointers in this regard will help.

Regards Poonam