Hello,
Please see inline.
On 7/26/21 9:40 AM, u-boot-request@lists.denx.de wrote:
Message: 13 Date: Mon, 26 Jul 2021 07:34:06 -0600 From: Simon Glasssjg@chromium.org To: U-Boot Mailing Listu-boot@lists.denx.de Cc: Tom Rinitrini@konsulko.com, Simon Glasssjg@chromium.org, Albert Aribaudalbert.u.boot@aribaud.net, Andy Fleming afleming@gmail.com, Joe Hershbergerjoe.hershberger@ni.com, Marek Vasutmarex@denx.de, Mario Sixmario.six@gdsys.cc, Oleksandr Zhadan and Michael Durrantarcsupport@arcturusnetworks.com, Pavel Herrmannmorpheus.ibis@gmail.com, Priyanka Jain priyanka.jain@nxp.com, Rob Herringrob.herring@calxeda.com, Stefan Roesesr@denx.de, Stefano Babicsbabic@denx.de, Wolfgang Denk wd@denx.de Subject: [PATCH 00/33] pci: Drop all pre-driver model code Message-ID:20210726133440.634682-1-sjg@chromium.org
The hard work to actually enable DM_PCI everywhere was done recently. This series attempts to drop most of the code that it no-longer needed now that PCI has been converted to driver model.
It also drops the UCP1020 board since it has various unique build issues.
What issues are we talking about?Please name it.
Today's u-boot clone builds and runs fine in our module without any warnings except:
git clone https://source.denx.de/u-boot/u-boot.git u-boot-20210728
cd u-boot-20210728
make UCP1020_defconfig
CROSS_COMPILE=powerpc-linux- make 2>222
> cat 222 ===================== WARNING ====================== This board does not use CONFIG_DM. CONFIG_DM will be compulsory starting with the v2020.01 release. Failure to update may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ===================================================
It doesn't even support driver model so it seems reasonable to just remove it.
1. Sure it's my fault that I didn't notice the warnings that CONFIG_DM is the only choice to build and run u-boot.
2. Why is CONFIG_DM still present in `make menuconfig` options?
3. We only use u-boot as the first stage bootloader to start the kernel. We need minimal device controllers support. We don't need anything like PCI, USB, etc.
4. At least you need to add doc/driver-model/migration.rst to the source tree from https://source.denx.de/u-boot/u-boot.git if you point to it in your warnings.
And
5. I have seen NO reason to remove ANY support board without REAL reasons to do so.
SUMMARY:
1. UCP1020_defconfig does not have any compiler warnings on build (at least 2021.07.28 clone).
2. If now the only choice is CONFIG_DM, then it should be removed as an option from "make menuconfig", and we will definitely fix the related warnings/errors.
3. IMPO board support can be removed if it breaks when built and/or breaks any other builds.
Thank you,
Oleks
The DM_PCI option disappears and only PCI is left.