-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Albert Aribaud Sent: Thursday, June 10, 2010 2:20 AM To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH V7 3/3] Add support for the LaCie ED Mini V2 board
This patch adds support for the LaCie ED Mini V2 product which is based on the Marvell Orion5x SoC.
Signed-off-by: Albert Aribaud albert.aribaud@free.fr
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/LaCie/edminiv2/Makefile | 53 ++++++++++++ board/LaCie/edminiv2/config.mk | 27 ++++++ board/LaCie/edminiv2/edminiv2.c | 92 +++++++++++++++++++++ include/configs/edminiv2.h | 172
...snip...
+/*
- Board-specific values for Orion5x MPP low level init:
- MPPs 12 to 15 are SATA LEDs (mode 5)
- Others are GPIO/unused (mode 3 for MPP0, mode 5 for
- MPP16 to MPP19, mode 0 for others
- */
+#define ORION5X_MPP0_7 0x00000003 +#define ORION5X_MPP8_15 0x55550000 +#define ORION5X_MPP16_23 0x00000000
+/*
- Board-specific values for Orion5x GPIO low level init:
- GPIO3 is input (RTC interrupt)
- GPIO16 is Power LED control (0 = on, 1 = off)
- GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
- GPIO18 is Power Button status (0 = Released, 1 = Pressed)
- Last GPIO is 26, further bits are supposed to be 0.
- Enable mask has ones for INPUT, 0 for OUTPUT.
- Default is LED ON.
- */
+#define ORION5X_GPIO_OUT_ENABLE 0x03fcffff +#define ORION5X_GPIO_OUT_VALUE 0x03fcffff
Ack for the patch, except above definition to be used in patch 1/3 Regards.. Prafulla . .