Haavard Skinnemoen skrev:
On 12/1/06, Lutz Ballaschke lutz.ballaschke@i2se.com wrote:
Hi there,
has anyone tried this before? I just know this board being supported by the atmel-patch for u-boot-1.1.4 and there is no MMC/SD support included. Might it be possible to adapt any existing source code? (possibly the AT91RM9200dk sources)?
I've got one for AT32AP7000, which uses basically the same MMC controller. I'll see if I can get it cleaned up for submission in a couple of days, although I've got some quite intrusive changes for AVR32 waiting for approval at the moment...
If you're using 1.1.4, you could of course try to pull the driver out of the patch at http://avr32linux.org/twiki/pub/Main/UbootPatches/u-boot-1.1.4-avr32-2006062......
Håvard
There is SD/MMC support in one of the AT91 Forums at www.at91.com Either Linux or ARM9. This was ported to U-.Boot 1.1.3 but I assume it is not a big deal to port it to 1.1.4 or later. /Ulf Samuelsson