Hi Wolfgang,
Thanks for your reply. i have changed the CONFIG_COMMANDS. i faced some problems when compiling with CFG_NET_CMD. Then i have compiled u-boot with CFG_CMD_ELF option.(Without CFG_CMD_NET). i can able to see bootelf option.
As per your instruction, i have converted my Image as zImage.srec. when comparing the size of the files, zImage's size is very low. size of Bin and srec are high.
I have downloaded the zImage.srec using loads command. i run the following command.
minicom> => protect off all => Un-Protect Flash Bank # 1 => loads 100000 .... PC> cat ../boot/zImage.srec > /dev/ttyS0
i see the following the msg in Minicom.
minicom> ## First Load Addr = 0x00100000 ## Last Load Addr = 0x000AE15F ## Total Size = 0x000AE160 = 713056 Bytes ## Start Addr = 0x00000000 => minicom> =>cp.b 100000 50040000 AE160 copy to Flash ../done. =>imi 50040000
## Checking Image at 50040000 ... Bad Magic Number
what is wrong in my procedure ?. Basically i want to boot my board using zImage.
Thanks Prakash