Vendor Authorized Boot is a security feature for authenticating the images such as U-Boot, ARM trusted Firmware, Linux kernel, device tree blob and etc loaded from FIT. After those images are loaded from FIT, the VAB certificate and signature block appended at the end of each image are sent to Secure Device Manager (SDM) for authentication. U-Boot will validate the SHA384 of the image against the SHA384 hash stored in the VAB certificate before sending the image to SDM for authentication.
Signed-off-by: Siew Chin Lim elly.siew.chin.lim@intel.com --- arch/arm/mach-socfpga/Kconfig | 15 ++ arch/arm/mach-socfpga/Makefile | 2 + arch/arm/mach-socfpga/include/mach/mailbox_s10.h | 1 + arch/arm/mach-socfpga/include/mach/secure_vab.h | 63 ++++++++ arch/arm/mach-socfpga/secure_vab.c | 188 +++++++++++++++++++++++ common/Kconfig.boot | 2 +- 6 files changed, 270 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-socfpga/include/mach/secure_vab.h create mode 100644 arch/arm/mach-socfpga/secure_vab.c
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 5dee193b31..1dfe08ec86 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -6,6 +6,21 @@ config ERR_PTR_OFFSET config NR_DRAM_BANKS default 1
+config SECURE_VAB_AUTH + bool "Enable boot image authentication with Secure Device Manager" + depends on TARGET_SOCFPGA_AGILEX || TARGET_SOCFPGA_DM + select FIT_IMAGE_POST_PROCESS + select SHA512_ALGO + select SHA384 + select SPL_FIT_IMAGE_POST_PROCESS + help + All images loaded from FIT will be authenticated by Secure Device + Manager. + +config SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE + bool "Allow non-FIT VAB signed images" + depends on SECURE_VAB_AUTH + config SPL_SIZE_LIMIT default 0x10000 if TARGET_SOCFPGA_GEN5
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index b88bb515d0..6ec4fcff73 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -48,6 +48,7 @@ obj-y += mailbox_s10.o obj-y += misc_s10.o obj-y += mmu-arm64_s10.o obj-y += reset_manager_s10.o +obj-$(CONFIG_SECURE_VAB_AUTH) += secure_vab.o obj-y += system_manager_soc64.o obj-y += timer_s10.o obj-y += wrap_handoff_soc64.o @@ -61,6 +62,7 @@ obj-y += mailbox_s10.o obj-y += misc_s10.o obj-y += mmu-arm64_s10.o obj-y += reset_manager_s10.o +obj-$(CONFIG_SECURE_VAB_AUTH) += secure_vab.o obj-y += system_manager_soc64.o obj-y += timer_s10.o obj-y += wrap_handoff_soc64.o diff --git a/arch/arm/mach-socfpga/include/mach/mailbox_s10.h b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h index 4d783119ea..fbaf11597e 100644 --- a/arch/arm/mach-socfpga/include/mach/mailbox_s10.h +++ b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h @@ -118,6 +118,7 @@ enum ALT_SDM_MBOX_RESP_CODE { #define MBOX_RECONFIG_MSEL 7 #define MBOX_RECONFIG_DATA 8 #define MBOX_RECONFIG_STATUS 9 +#define MBOX_VAB_SRC_CERT 11 #define MBOX_QSPI_OPEN 50 #define MBOX_QSPI_CLOSE 51 #define MBOX_QSPI_DIRECT 59 diff --git a/arch/arm/mach-socfpga/include/mach/secure_vab.h b/arch/arm/mach-socfpga/include/mach/secure_vab.h new file mode 100644 index 0000000000..42588588e8 --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/secure_vab.h @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (C) 2020 Intel Corporation <www.intel.com> + * + */ + +#ifndef _SECURE_VAB_H_ +#define _SECURE_VAB_H_ + +#include <linux/sizes.h> +#include <linux/stddef.h> +#include <u-boot/sha512.h> + +#define VAB_DATA_SZ 64 + +#define SDM_CERT_MAGIC_NUM 0x25D04E7F +#define FCS_HPS_VAB_MAGIC_NUM 0xD0564142 + +#define MAX_CERT_SIZE (SZ_4K) + +/* + * struct fcs_hps_vab_certificate_data + * @vab_cert_magic_num: VAB Certificate Magic Word (0xD0564142) + * @flags: TBD + * @fcs_data: Data words being certificate signed. + * @cert_sign_keychain: Certificate Signing Keychain + */ +struct fcs_hps_vab_certificate_data { + u32 vab_cert_magic_num; /* offset 0x10 */ + u32 flags; + u8 rsvd0_1[8]; + u8 fcs_sha384[SHA384_SUM_LEN]; /* offset 0x20 */ +}; + +/* + * struct fcs_hps_vab_certificate_header + * @cert_magic_num: Certificate Magic Word (0x25D04E7F) + * @cert_data_sz: size of this certificate header (0x80) + * Includes magic number all the way to the certificate + * signing keychain (excludes cert. signing keychain) + * @cert_ver: Certificate Version + * @cert_type: Certificate Type + * @data: VAB HPS Image Certificate data + */ +struct fcs_hps_vab_certificate_header { + u32 cert_magic_num; /* offset 0 */ + u32 cert_data_sz; + u32 cert_ver; + u32 cert_type; + struct fcs_hps_vab_certificate_data d; /* offset 0x10 */ + /* keychain starts at offset 0x50 */ +}; + +#define VAB_CERT_HEADER_SIZE sizeof(struct fcs_hps_vab_certificate_header) +#define VAB_CERT_MAGIC_OFFSET offsetof \ + (struct fcs_hps_vab_certificate_header, d) +#define VAB_CERT_FIT_SHA384_OFFSET offsetof \ + (struct fcs_hps_vab_certificate_data, \ + fcs_sha384[0]) + +int socfpga_vendor_authentication(void **p_image, size_t *p_size); + +#endif /* _SECURE_VAB_H_ */ diff --git a/arch/arm/mach-socfpga/secure_vab.c b/arch/arm/mach-socfpga/secure_vab.c new file mode 100644 index 0000000000..3dd4de127b --- /dev/null +++ b/arch/arm/mach-socfpga/secure_vab.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Intel Corporation <www.intel.com> + * + */ + +#include <common.h> +#include <hang.h> +#include <asm/arch/mailbox_s10.h> +#include <asm/arch/secure_vab.h> +#include <asm/arch/smc_api.h> +#include <asm/unaligned.h> +#include <exports.h> +#include <image.h> +#include <linux/errno.h> +#include <linux/intel-smc.h> +#include <log.h> + +#define CHUNKSZ_PER_WD_RESET (256 * 1024) + +/* + * Read the length of the VAB certificate from the end of image + * and calculate the actual image size (excluding the VAB certificate). + */ +static size_t get_img_size(u8 *img_buf, size_t img_buf_sz) +{ + u8 *img_buf_end = img_buf + img_buf_sz; + u32 cert_sz = get_unaligned_le32(img_buf_end - sizeof(u32)); + u8 *p = img_buf_end - cert_sz - sizeof(u32); + + /* Ensure p is pointing within the img_buf */ + if (p < img_buf || p > (img_buf_end - VAB_CERT_HEADER_SIZE)) + return 0; + + if (get_unaligned_le32(p) == SDM_CERT_MAGIC_NUM) + return (size_t)(p - img_buf); + + return 0; +} + +int socfpga_vendor_authentication(void **p_image, size_t *p_size) +{ + int retry_count = 20; + u8 hash384[SHA384_SUM_LEN]; + u64 img_addr, mbox_data_addr; + size_t img_sz, mbox_data_sz; + u8 *cert_hash_ptr; + u32 backup_word; + u32 resp = 0, resp_len = 1; + int ret; + + img_addr = (uintptr_t)*p_image; + + debug("Authenticating image at address 0x%016llx (%ld bytes)\n", + img_addr, *p_size); + + img_sz = get_img_size((u8 *)img_addr, *p_size); + debug("img_sz = %ld\n", img_sz); + + if (!img_sz) { + puts("VAB certificate not found in image!\n"); + return -ENOKEY; + } + + if (!IS_ALIGNED(img_sz, sizeof(u32))) { + printf("Image size (%ld bytes) not aliged to 4 bytes!\n", + img_sz); + return -EBFONT; + } + + /* Generate HASH384 from the image */ + sha384_csum_wd((u8 *)img_addr, img_sz, hash384, CHUNKSZ_PER_WD_RESET); + + cert_hash_ptr = (u8 *)(img_addr + img_sz + VAB_CERT_MAGIC_OFFSET + + VAB_CERT_FIT_SHA384_OFFSET); + + /* + * Compare the SHA384 found in certificate against the SHA384 + * calculated from image + */ + if (memcmp(hash384, cert_hash_ptr, SHA384_SUM_LEN)) { + puts("SHA384 not match!\n"); + return -EKEYREJECTED; + } + + mbox_data_addr = img_addr + img_sz - sizeof(u32); + /* Size in word (32bits) */ + mbox_data_sz = (ALIGN(*p_size - img_sz, 4)) >> 2; + + debug("mbox_data_addr = 0x%016llx\n", mbox_data_addr); + debug("mbox_data_sz = %ld\n", mbox_data_sz); + + /* We need to use the 4 bytes before the certificate for T */ + backup_word = *(u32 *)mbox_data_addr; + /* T = 0 */ + *(u32 *)mbox_data_addr = 0; + + do { +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) + /* Invoke SMC call to ATF to send the VAB certificate to SDM */ + ret = smc_send_mailbox(MBOX_VAB_SRC_CERT, mbox_data_sz, + (u32 *)mbox_data_addr, 0, &resp_len, + &resp); +#else + /* Send the VAB certficate to SDM for authentication */ + ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_VAB_SRC_CERT, + MBOX_CMD_DIRECT, mbox_data_sz, + (u32 *)mbox_data_addr, 0, &resp_len, + &resp); +#endif + /* If SDM is not available, just delay 50ms and retry again */ + if (ret == MBOX_RESP_DEVICE_BUSY) + mdelay(50); + else + break; + } while (--retry_count); + + /* Restore the original 4 bytes */ + *(u32 *)mbox_data_addr = backup_word; + + /* Exclude the size of the VAB certificate from image size */ + *p_size = img_sz; + + debug("ret = 0x%08x, resp = 0x%08x, resp_len = %d\n", ret, resp, + resp_len); + + if (ret) { + /* + * Unsupported mailbox command or device not in the + * owned/secure state + */ + if (ret == MBOX_RESP_UNKNOWN || + ret == MBOX_RESP_NOT_ALLOWED_UNDER_SECURITY_SETTINGS) { + /* SDM bypass authentication */ + printf("%s 0x%016llx (%ld bytes)\n", + "Image Authentication bypassed at address", + img_addr, img_sz); + return 0; + } + puts("VAB certificate authentication failed in SDM"); + if (ret == MBOX_RESP_DEVICE_BUSY) { + puts("(SDM busy timeout)\n"); + return -ETIMEDOUT; + } + puts("\n"); + return -EKEYREJECTED; + } else { + /* If Certificate Process Status has error */ + if (resp) { + puts("VAB certificate process failed\n"); + return -ENOEXEC; + } + } + + debug("Image Authentication passed\n"); + + return 0; +} + +void board_fit_image_post_process(void **p_image, size_t *p_size) +{ + if (socfpga_vendor_authentication(p_image, p_size)) + hang(); +} + +#ifndef CONFIG_SPL_BUILD +void board_prep_linux(bootm_headers_t *images) +{ +#ifndef CONFIG_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE + /* + * Ensure the OS is always booted from FIT and with + * VAB signed certificate + */ + if (!images->fit_uname_cfg) { + printf("Please use FIT with VAB signed images!\n"); + hang(); + } + + env_set_hex("fdt_addr", (ulong)images->ft_addr); + debug("images->ft_addr = 0x%08lx\n", (ulong)images->ft_addr); +#endif + +#ifdef CONFIG_CADENCE_QSPI + if (run_command(env_get("linux_qspi_enable"), 0)) + printf("Warning: Failed to set Linux DTB QSPI frequency!\n"); +#endif +} +#endif diff --git a/common/Kconfig.boot b/common/Kconfig.boot index 3f6d9c1a25..09aab763e6 100644 --- a/common/Kconfig.boot +++ b/common/Kconfig.boot @@ -128,7 +128,7 @@ config FIT_BEST_MATCH
config FIT_IMAGE_POST_PROCESS bool "Enable post-processing of FIT artifacts after loading by U-Boot" - depends on TI_SECURE_DEVICE + depends on TI_SECURE_DEVICE || SECURE_VAB_AUTH help Allows doing any sort of manipulation to blobs after they got extracted from FIT images like stripping off headers or modifying the size of the