From: Daniel Allred d-allred@ti.com
Add an interface for calling secure ROM APIs across a range of OMAP and OMAP compatible high-security (HS) device variants. While at it, also perform minor cleanup/alignment without any change in functionality.
Signed-off-by: Daniel Allred d-allred@ti.com Signed-off-by: Andreas Dannenberg dannenberg@ti.com Reviewed-by: Simon Glass sjg@chromium.org --- arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 45 ++++++++++++++++++++------ arch/arm/include/asm/omap_common.h | 6 ++++ 2 files changed, 42 insertions(+), 9 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 5283135..66a3b3d 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -16,9 +16,10 @@ #include <asm/arch/spl.h> #include <linux/linkage.h>
+.arch_extension sec + #ifdef CONFIG_SPL ENTRY(save_boot_params) - ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] b save_boot_params_ret @@ -26,14 +27,40 @@ ENDPROC(save_boot_params) #endif
ENTRY(omap_smc1) - PUSH {r4-r12, lr} @ save registers - ROM code may pollute + push {r4-r12, lr} @ save registers - ROM code may pollute @ our registers - MOV r12, r0 @ Service - MOV r0, r1 @ Argument - DSB - DMB - .word 0xe1600070 @ SMC #0 - hand assembled for GCC versions - @ call ROM Code API for the service requested + mov r12, r0 @ Service + mov r0, r1 @ Argument
- POP {r4-r12, pc} + dsb + dmb + smc 0 @ SMC #0 to enter monitor mode + @ call ROM Code API for the service requested + pop {r4-r12, pc} ENDPROC(omap_smc1) + +ENTRY(omap_smc_sec) + push {r4-r12, lr} @ save registers - ROM code may pollute + @ our registers + mov r6, #0xFF @ Indicate new Task call + mov r12, #0x00 @ Secure Service ID in R12 + + dsb + dmb + smc 0 @ SMC #0 to enter monitor mode + + b omap_smc_sec_end @ exit at end of the service execution + nop + + @ In case of IRQ happening in Secure, then ARM will branch here. + @ At that moment, IRQ will be pending and ARM will jump to Non Secure + @ IRQ handler + mov r12, #0xFE + + dsb + dmb + smc 0 @ SMC #0 to enter monitor mode + +omap_smc_sec_end: + pop {r4-r12, pc} +ENDPROC(omap_smc_sec) diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 07f3848..605c549 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -627,6 +627,12 @@ void recalibrate_iodelay(void);
void omap_smc1(u32 service, u32 val);
+/* + * Low-level helper function used when performing secure ROM calls on high- + * security (HS) device variants by doing a specially-formed smc entry. + */ +u32 omap_smc_sec(u32 service, u32 proc_id, u32 flag, u32 *params); + void enable_edma3_clocks(void); void disable_edma3_clocks(void);