On 2024/10/26 17:34, Andy Yan wrote:
Add support for Cool Pi GenBook, it works as a carrier board connect with CM5 SOM.
Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080
Tested by Armbian boot on USB disk.
Signed-off-by: Andy Yan andyshrk@163.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
Changes in v3:
- Remove upstreamed dt in genbook-u-boot.dtsi
- Remove MMC releated config as there is no SD-card on this machine
- Enable LED config
- Enable rk8xx pmic
- rename defconfig to coolpi-cm5-genbook-rk3588_defconfig
- redefine BOOT_TARGETS
Changes in v2:
split the dts to a separate commit
rename to genbook_cm5_rk3588
move readme to doc/board, and write as reStructuredText format
alphabetically reorder
update doc/board/rockchip
.../dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi | 20 ++++ arch/arm/mach-rockchip/rk3588/Kconfig | 19 ++++ board/coolpi/genbook_cm5_rk3588/Kconfig | 12 +++ board/coolpi/genbook_cm5_rk3588/MAINTAINERS | 7 ++ configs/coolpi-cm5-genbook-rk3588_defconfig | 101 ++++++++++++++++++ doc/board/coolpi/genbook_cm5_rk3588.rst | 68 ++++++++++++ doc/board/coolpi/index.rst | 9 ++ doc/board/rockchip/rockchip.rst | 1 + include/configs/genbook-cm5-rk3588.h | 31 ++++++ 9 files changed, 268 insertions(+) create mode 100644 arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi create mode 100644 board/coolpi/genbook_cm5_rk3588/Kconfig create mode 100644 board/coolpi/genbook_cm5_rk3588/MAINTAINERS create mode 100644 configs/coolpi-cm5-genbook-rk3588_defconfig create mode 100644 doc/board/coolpi/genbook_cm5_rk3588.rst create mode 100644 doc/board/coolpi/index.rst create mode 100644 include/configs/genbook-cm5-rk3588.h
diff --git a/arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi b/arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi new file mode 100644 index 00000000000..5a3073d6e7f --- /dev/null +++ b/arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+#include "rk3588-u-boot.dtsi"
+&fspim2_pins {
- bootph-pre-ram;
- bootph-some-ram;
+};
+&sfc {
- flash@0 {
bootph-pre-ram;bootph-some-ram;- };
+};
+/* USB A out */ +&usb_host1_xhci {
- snps,dis_u3_susphy_quirk;
+}; diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig index a76a470cc98..c53f6bb926e 100644 --- a/arch/arm/mach-rockchip/rk3588/Kconfig +++ b/arch/arm/mach-rockchip/rk3588/Kconfig @@ -29,6 +29,24 @@ config TARGET_CM3588_NAS_RK3588 - 3.5mm Headphone out, 2.0mm PH-2A Mic in - 5V Fan connector, PWM beeper, IR receiver, RTC battery connector
+config TARGET_GENBOOK_CM5_RK3588
- bool "Cool Pi CM5 GenBook"
- select BOARD_LATE_INIT
- help
GeenBook is a notebook based on Rockchip RK3588, and works as a carrierboard connect with CM5 SOM.Specification:- Rockchip RK3588- LPDDR5X 8/32 GB- eMMC 64 GB- HDMI Type A out x 1- USB 3.0 Host x 1- USB-C 3.0 with DisplayPort AltMode- PCIE M.2 E Key for RTL8852BE Wireless connection- PCIE M.2 M Key for NVME connection- eDP panel with 1920x1080- config TARGET_JAGUAR_RK3588 bool "Theobroma Systems SBC-RK3588-AMR (Jaguar)" select BOARD_LATE_INIT
@@ -361,6 +379,7 @@ config TEXT_BASE default 0x00a00000
source "board/armsom/sige7-rk3588/Kconfig" +source "board/coolpi/genbook_cm5_rk3588/Kconfig" source "board/edgeble/neural-compute-module-6/Kconfig" source "board/friendlyelec/cm3588-nas-rk3588/Kconfig" source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" diff --git a/board/coolpi/genbook_cm5_rk3588/Kconfig b/board/coolpi/genbook_cm5_rk3588/Kconfig new file mode 100644 index 00000000000..67086ea6297 --- /dev/null +++ b/board/coolpi/genbook_cm5_rk3588/Kconfig @@ -0,0 +1,12 @@ +if TARGET_GENBOOK_CM5_RK3588
+config SYS_BOARD
- default "genbook_cm5_rk3588"
+config SYS_VENDOR
- default "coolpi"
+config SYS_CONFIG_NAME
- default "genbook-cm5-rk3588"
+endif diff --git a/board/coolpi/genbook_cm5_rk3588/MAINTAINERS b/board/coolpi/genbook_cm5_rk3588/MAINTAINERS new file mode 100644 index 00000000000..0496cc93b59 --- /dev/null +++ b/board/coolpi/genbook_cm5_rk3588/MAINTAINERS @@ -0,0 +1,7 @@ +GENBOOK-CM5-RK3588 +M: Andy Yan andyshrk@163.com +S: Maintained +F: board/coolpi/genbook-cm5-rk3588 +F: include/configs/genbook-cm5-rk3588.h +F: configs/coolpi-cm5-genbook-rk3588_defconfig +F: arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi diff --git a/configs/coolpi-cm5-genbook-rk3588_defconfig b/configs/coolpi-cm5-genbook-rk3588_defconfig new file mode 100644 index 00000000000..3eb5dc968af --- /dev/null +++ b/configs/coolpi-cm5-genbook-rk3588_defconfig @@ -0,0 +1,101 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-coolpi-cm5-genbook" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_ROCKCHIP_SPI_IMAGE=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_GENBOOK_CM5_RK3588=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_SF_DEFAULT_BUS=5 +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-coolpi-cm5-genbook.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_ATF=y +# CONFIG_CMD_BIND is not set +# CONFIG_CMD_FASTBOOT is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_BUF_ADDR=0x800800 +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_SPL_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_XMC=y +CONFIG_SPI_FLASH_XTX=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SFC=y +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_ERRNO_STR=y diff --git a/doc/board/coolpi/genbook_cm5_rk3588.rst b/doc/board/coolpi/genbook_cm5_rk3588.rst new file mode 100644 index 00000000000..b0ddc786314 --- /dev/null +++ b/doc/board/coolpi/genbook_cm5_rk3588.rst @@ -0,0 +1,68 @@ +.. SPDX-License-Identifier: GPL-2.0+
+GenBook +===================== +Cool Pi GenBook is a laptop powered by RK3588, it works with a +carrier board connect with CM5.
+Specification: +* Rockchip RK3588 +* LPDDR5X 8/32 GB +* eMMC 64 GB +* SPI Nor 8 MB +* HDMI Type A out x 1 +* USB 3.0 Host x 1 +* USB-C 3.0 with DisplayPort AltMode +* PCIE M.2 E Key for RTL8852BE Wireless connection +* PCIE M.2 M Key for NVME connection +* eDP panel with 1920x1080
+Here is the step-by-step to compile and boot to U-Boot on GenBook.
+Get the TF-A and DDR init (TPL) binaries +----------------------------------------
+.. prompt:: bash
+This will build ``u-boot-rockchip.bin`` for eMMC and ``u-boot-rockchip-spi.bin`` for SPI Nor.
+Write u-boot to eMMC or SPI Nor from a Linux system on the laptop +---------------
+Copy ``u-boot-rockchip.bin`` and ``u-boot-rockchip-spi.bin`` to the laptop.
+eMMC +~~~~~~~
+.. prompt:: bash
- dd if=u-boot-rockchip.bin of=/dev/mmcblk0 bs=512 seek=64
+SPI Nor +~~~~
+.. prompt:: bash
- dd if=u-boot-rockchip-spi.bin of=/dev/mtdblock0
+``upgrade_tool`` allows to flash the on-board SPI Nor via the USB TypeC interface +with help of the Rockchip loader binary.
+To enter the USB flashing mode, connect the laptop and your HOST PC with a USB-C +cable, reset the laptop with ``Loader Key`` pressed. +On your PC, check with ``lsusb -d 2207:350b``).
+To flash U-Boot on the SPI Nor with ``upgrade_tool``:
+.. prompt:: bash
- upgrade_tool db rk3588/MiniLoaderAll.bin
- upgrade_tool ssd // Input 5 for SPINOR download mode
- upgrade_tool wl 0 u-boot-rockchip-spi.bin
- upgrade_tool rd
diff --git a/doc/board/coolpi/index.rst b/doc/board/coolpi/index.rst new file mode 100644 index 00000000000..9c9593fd6aa --- /dev/null +++ b/doc/board/coolpi/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+
+Cool Pi +=================
+.. toctree::
- :maxdepth: 2
- genbook_cm5_rk3588
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 86d83befb5b..2d6593cba75 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -145,6 +145,7 @@ List of mainline supported Rockchip boards: - Xunlong Orange Pi 5 Plus (orangepi-5-plus-rk3588) - Yanyi Tech CoolPi 4 Model B (coolpi-4b-rk3588s) - Yanyi Tech CoolPi CM5 EVB (coolpi-cm5-evb-rk3588)
- Yanyi Tech CoolPi CM5 GenBook (coolpi-cm5-genbook-rk3588)
- rv1108
- Rockchip Evb-rv1108 (evb-rv1108)
diff --git a/include/configs/genbook-cm5-rk3588.h b/include/configs/genbook-cm5-rk3588.h new file mode 100644 index 00000000000..f71f735b113 --- /dev/null +++ b/include/configs/genbook-cm5-rk3588.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- */
+#ifndef __GENBOOK_CM5_RK3588_H +#define __GENBOOK_CM5_RK3588_H
+#define ROCKCHIP_DEVICE_SETTINGS \
"stdout=serial,vidconsole\0" \"stderr=serial,vidconsole\0"+#include <configs/rk3588_common.h>
+#undef BOOT_TARGETS +#define BOOT_TARGETS "usb mmc0"
+#undef CFG_EXTRA_ENV_SETTINGS
+/*
- As a laptop, there is no sdmmc, and we want to
- set usb the highest boot priority for third-part
- os installation.
- */
+#define CFG_EXTRA_ENV_SETTINGS \
- "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "partitions=" PARTS_DEFAULT \
- ENV_MEM_LAYOUT_SETTINGS \
- ROCKCHIP_DEVICE_SETTINGS \
- "boot_targets=" BOOT_TARGETS "\0"
+#endif /* __GENBOOK_CM5_RK3588_H */