Re: [U-Boot-Users] u-boot can not boot after change flashdisk from 8M to 16M

On Fri, 2004-11-19 at 09:46, Tyler Jia wrote:

Hello,

Because need more flash disk space, I replace ppc405ep board flashdisk 8M (intel 28F640j3 8MByte=64Mbite= 128k x 64) to 16M flashdisk (intel 28F128j3 16Mbyte=128Mbit=128k x 128).

<SNIP>

ff800000-ffffffff, u-boot.bin image address is from fffe0000-ffffffff, then the new 16M flashdisk is from ff000000-ffffffff, I still put the u-boot.bin in fffe0000-ffffffff in 16M flash memory.

Have you ensured you programmed u-boot to 0xFFF80000. AFAIK, the ppc4xx series must have u-boot there.

-travis