And ofcourse, that went wrong.
sign-off line is incorrect.
Add autodetection of nr of banks and total sdram size for ixp processor tested on ixpdg425 and pdnb3 board.
Signed-off-by: martijn de gouw martijn.de.gouw@prodrive.nl --- board/prodrive/pdnb3/pdnb3.c | 31 +++++++++++++- cpu/ixp/start.S | 95 ++++++++++++++++++++++++++++++++++++++++++ include/configs/pdnb3.h | 2 - 3 files changed, 125 insertions(+), 3 deletions(-)
diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c index 3445a3a..a049afe 100644 --- a/board/prodrive/pdnb3/pdnb3.c +++ b/board/prodrive/pdnb3/pdnb3.c @@ -120,8 +120,37 @@ int checkboard(void)
int dram_init(void) { + volatile unsigned long *sdr_config = (unsigned long *)IXP425_SDR_CONFIG; + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + switch ((*sdr_config & ~(0x18))) { + case 0x20: + gd->bd->bi_dram[0].size = (8 << 20); + break; + case 0x21: + case 0x22: + gd->bd->bi_dram[0].size = (16 << 20); + break; + case 0x23: + case 0x00: + gd->bd->bi_dram[0].size = (32 << 20); + break; + case 0x01: + case 0x02: + gd->bd->bi_dram[0].size = (64 << 20); + break; + case 0x03: + case 0x04: + gd->bd->bi_dram[0].size = (128 << 20); + break; + case 0x09: + gd->bd->bi_dram[0].size = (256 << 20); + break; + default: + gd->bd->bi_dram[0].size = 0; + break; + }
return (0); } diff --git a/cpu/ixp/start.S b/cpu/ixp/start.S index d4c8e33..f1123de 100644 --- a/cpu/ixp/start.S +++ b/cpu/ixp/start.S @@ -165,7 +165,16 @@ reset: orr r1, r1, #0x80000000 str r1, [r2] #endif + +#ifdef CFG_SDR_CONFIG mov r1, #CFG_SDR_CONFIG + mov r9, #0xff +#else + mov r1, #0x1d /* 256 MB, two banks of 128 MB */ + mov r9, #0 +#endif + +sdr_init: ldr r2, =IXP425_SDR_CONFIG str r1, [r2]
@@ -208,6 +217,92 @@ reset: str r1, [r4] DELAY_FOR 0x4000, r0
+ cmp r9, #0xff + beq sdr_init_done + +sdr_test_cs1: + /* test if there are chips connected to bank 1 */ + mov r9, #0x18 /* holds new SDR_CONFIG value */ + mov r1, #(256 << 20) + orr r1, r1, #(128 << 20) + orr r1, r1, #(1 << 20) + mov r2, #0 + str r2, [r1] + ldr r3, [r1] + cmp r2, r3 + bne sdr_test_cs0 + orr r9, r9, #(0x01) + +sdr_test_cs0: + /* test chip size on bank 0 */ + /* r1: holds test address */ + /* r3: holds test value */ + /* r5: holds mirror address */ + + /* clear @ 1MB */ + mov r1, #(1 << 20) + orr r1, r1, #(256 << 20) + mov r2, #0 + str r2, [r1] + + /* test value and test offset */ + mov r3, #0xbe + orr r3, r3, #(0xba << 8) + orr r3, r3, #(0xfe << 16) + orr r3, r3, #(0xca << 24) + + mov r4, #(1 << 20) + orr r4, r4, #(256 << 20) + b sdr_try_32Mbit + +sdr_try_32Mbit: + orr r5, r4, #(4 << 20) + str r3, [r5] + ldr r6, [r1] + cmp r6, r3 + bne sdr_try_64Mbit + add r9, r9, #0x00 + orr r9, r9, #(1 << 5) + b sdr_reinit + +sdr_try_64Mbit: + orr r5, r4, #(4 << 20) + str r3, [r5] + ldr r6, [r1] + cmp r6, r3 + bne sdr_try_128Mbit + add r9, r9, #0x02 + orr r9, r9, #(1 << 5) + b sdr_reinit + +sdr_try_128Mbit: + orr r5, r4, #(8 << 20) + str r3, [r5] + ldr r6, [r1] + cmp r6, r3 + bne sdr_try_256Mbit + add r9, r9, #0x00 + b sdr_reinit + +sdr_try_256Mbit: + orr r5, r4, #(16 << 20) + str r3, [r5] + ldr r6, [r1] + cmp r6, r3 + bne sdr_try_512Mbit + add r9, r9, #0x02 + b sdr_reinit + +sdr_try_512Mbit: + add r9, r9, #0x04 + b sdr_reinit + +sdr_reinit: + mov r1, r9 + mov r9, #0xff + b sdr_init + +sdr_init_done: /* copy */ mov r0, #0 mov r4, r0 diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 889207a..ea15052 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -186,7 +186,6 @@ */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
#define CFG_FLASH_BASE 0x50000000 #define CFG_MONITOR_BASE CFG_FLASH_BASE @@ -209,7 +208,6 @@ /* * SDRAM settings */ -#define CFG_SDR_CONFIG 0x18 #define CFG_SDR_MODE_CONFIG 0x1 #define CFG_SDRAM_REFRESH_CNT 0x81a