Add pinctrl and GPIO driver for SM8150. Driver code is based on the similar U-Boot drivers. All constants are taken from the corresponding Linux driver. This drivers differs from the similar U-Boot drivers, because SM8150 SoC have different function IDs for the same functions on different pins.
Co-authored-by: Volodymyr Babchuk volodymyr_babchuk@epam.com Reviewed-by: Caleb Connolly caleb.connolly@linaro.org Signed-off-by: Julius Lehmann lehmanju@devpi.de --- drivers/pinctrl/qcom/Kconfig | 8 ++ drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sm8150.c | 156 ++++++++++++++++++++++++++++++++++ 3 files changed, 165 insertions(+)
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index b326fa8514..4f93a34281 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -55,6 +55,13 @@ config PINCTRL_QCOM_SM6115 Say Y here to enable support for pinctrl on the Snapdragon SM6115 SoC, as well as the associated GPIO driver.
+config PINCTRL_QCOM_SM8150 + bool "Qualcomm SM8150 GCC" + select PINCTRL_QCOM + help + Say Y here to enable support for pinctrl on the Snapdragon SM8150 SoC, + as well as the associated GPIO driver. + config PINCTRL_QCOM_SM8250 bool "Qualcomm SM8250 GCC" select PINCTRL_QCOM @@ -74,6 +81,7 @@ config PINCTRL_QCOM_SM8650 select PINCTRL_QCOM help Say Y here to enable support for pinctrl on the Snapdragon SM8650 SoC, + as well as the associated GPIO driver.
endmenu
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 4f1d96787b..43d0dd2922 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_PINCTRL_QCOM_QCM2290) += pinctrl-qcm2290.o obj-$(CONFIG_PINCTRL_QCOM_QCS404) += pinctrl-qcs404.o obj-$(CONFIG_PINCTRL_QCOM_SDM845) += pinctrl-sdm845.o obj-$(CONFIG_PINCTRL_QCOM_SM6115) += pinctrl-sm6115.o +obj-$(CONFIG_PINCTRL_QCOM_SM8150) += pinctrl-sm8150.o obj-$(CONFIG_PINCTRL_QCOM_SM8250) += pinctrl-sm8250.o obj-$(CONFIG_PINCTRL_QCOM_SM8550) += pinctrl-sm8550.o obj-$(CONFIG_PINCTRL_QCOM_SM8650) += pinctrl-sm8650.o diff --git a/drivers/pinctrl/qcom/pinctrl-sm8150.c b/drivers/pinctrl/qcom/pinctrl-sm8150.c new file mode 100644 index 0000000000..1fb2ffb959 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8150.c @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Qualcomm SM8150 pinctrl and GPIO driver + * + * Volodymyr Babchuk volodymyr_babchuk@epam.com + * Copyright (c) 2024 EPAM Systems. + * + * (C) Copyright 2024 Julius Lehmann lehmanju@devpi.de + * + * Based on similar U-Boot drivers. Constants were taken from the Linux driver + */ + +#include <dm.h> + +#include "pinctrl-qcom.h" + +#define WEST 0x100000 +#define EAST 0x500000 +#define NORTH 0x900000 +#define SOUTH 0xd00000 + +#define MAX_PIN_NAME_LEN 32 +static char pin_name[MAX_PIN_NAME_LEN] __section(".data"); + +static const struct pinctrl_function msm_pinctrl_functions[] = { + { "qup2", 1 }, + { "gpio", 0 }, +}; + +static const unsigned int sm8150_pin_offsets[] = { + [0] = SOUTH, [1] = SOUTH, [2] = SOUTH, [3] = SOUTH, + [4] = SOUTH, [5] = SOUTH, [6] = SOUTH, [7] = SOUTH, + [8] = NORTH, [9] = NORTH, [10] = NORTH, [11] = NORTH, + [12] = NORTH, [13] = NORTH, [14] = NORTH, [15] = NORTH, + [16] = NORTH, [17] = NORTH, [18] = NORTH, [19] = NORTH, + [20] = NORTH, [21] = EAST, [22] = EAST, [23] = EAST, + [24] = EAST, [25] = EAST, [26] = EAST, [27] = EAST, + [28] = EAST, [29] = EAST, [30] = EAST, [31] = NORTH, + [32] = NORTH, [33] = NORTH, [34] = NORTH, [35] = NORTH, + [36] = NORTH, [37] = NORTH, [38] = SOUTH, [39] = NORTH, + [40] = NORTH, [41] = NORTH, [42] = NORTH, [43] = EAST, + [44] = EAST, [45] = EAST, [46] = EAST, [47] = EAST, + [48] = EAST, [49] = EAST, [50] = EAST, [51] = SOUTH, + [52] = SOUTH, [53] = SOUTH, [54] = SOUTH, [55] = SOUTH, + [56] = SOUTH, [57] = SOUTH, [58] = SOUTH, [59] = SOUTH, + [60] = SOUTH, [61] = SOUTH, [62] = SOUTH, [63] = SOUTH, + [64] = SOUTH, [65] = SOUTH, [66] = SOUTH, [67] = SOUTH, + [68] = SOUTH, [69] = SOUTH, [70] = SOUTH, [71] = SOUTH, + [72] = SOUTH, [73] = SOUTH, [74] = SOUTH, [75] = SOUTH, + [76] = SOUTH, [77] = SOUTH, [78] = SOUTH, [79] = SOUTH, + [80] = SOUTH, [81] = SOUTH, [82] = SOUTH, [83] = NORTH, + [84] = NORTH, [85] = NORTH, [86] = NORTH, [87] = EAST, + [88] = NORTH, [89] = NORTH, [90] = NORTH, [91] = NORTH, + [92] = NORTH, [93] = NORTH, [94] = NORTH, [95] = NORTH, + [96] = NORTH, [97] = NORTH, [98] = SOUTH, [99] = SOUTH, + [100] = SOUTH, [101] = SOUTH, [102] = NORTH, [103] = NORTH, + [104] = NORTH, [105] = WEST, [106] = WEST, [107] = WEST, + [108] = WEST, [109] = WEST, [110] = WEST, [111] = WEST, + [112] = WEST, [113] = WEST, [114] = SOUTH, [115] = SOUTH, + [116] = SOUTH, [117] = SOUTH, [118] = SOUTH, [119] = SOUTH, + [120] = SOUTH, [121] = SOUTH, [122] = SOUTH, [123] = SOUTH, + [124] = SOUTH, [125] = WEST, [126] = SOUTH, [127] = SOUTH, + [128] = SOUTH, [129] = SOUTH, [130] = SOUTH, [131] = SOUTH, + [132] = SOUTH, [133] = SOUTH, [134] = SOUTH, [135] = SOUTH, + [136] = SOUTH, [137] = SOUTH, [138] = SOUTH, [139] = SOUTH, + [140] = SOUTH, [141] = SOUTH, [142] = SOUTH, [143] = SOUTH, + [144] = SOUTH, [145] = SOUTH, [146] = SOUTH, [147] = SOUTH, + [148] = SOUTH, [149] = SOUTH, [150] = SOUTH, [151] = SOUTH, + [152] = SOUTH, [153] = SOUTH, [154] = SOUTH, [155] = WEST, + [156] = WEST, [157] = WEST, [158] = WEST, [159] = WEST, + [160] = WEST, [161] = WEST, [162] = WEST, [163] = WEST, + [164] = WEST, [165] = WEST, [166] = WEST, [167] = WEST, + [168] = WEST, [169] = NORTH, [170] = NORTH, [171] = NORTH, + [172] = NORTH, [173] = NORTH, [174] = NORTH, +}; + +#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv) \ + { \ + .name = pg_name, \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + } + +#define UFS_RESET(pg_name, offset) \ + { \ + .name = pg_name, \ + .ctl_reg = offset, \ + .io_reg = offset + 0x04, \ + .pull_bit = 3, \ + .drv_bit = 0, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = 0, \ + } + +static const struct msm_special_pin_data msm_special_pins_data[] = { + [0] = UFS_RESET("ufs_reset", SOUTH + 0xb6000), + [1] = SDC_QDSD_PINGROUP("sdc2_clk", NORTH + 0xb2000, 14, 6), + [2] = SDC_QDSD_PINGROUP("sdc2_cmd", NORTH + 0xb2000, 11, 3), + [3] = SDC_QDSD_PINGROUP("sdc2_data", NORTH + 0xb2000, 9, 0), +}; + +static const char *sm8150_get_function_name(struct udevice *dev, + unsigned int selector) +{ + return msm_pinctrl_functions[selector].name; +} + +static const char *sm8150_get_pin_name(struct udevice *dev, + unsigned int selector) +{ + if (selector >= 175 && selector <= 178) + snprintf(pin_name, MAX_PIN_NAME_LEN, + msm_special_pins_data[selector - 175].name); + else + snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector); + + return pin_name; +} + +static unsigned int sm8150_get_function_mux(__maybe_unused unsigned int pin, + unsigned int selector) +{ + return msm_pinctrl_functions[selector].val; +} + +static struct msm_pinctrl_data sm8150_data = { + .pin_data = { + .pin_offsets = sm8150_pin_offsets, + .pin_count = 179, + .special_pins_start = 175, + .special_pins_data = msm_special_pins_data, + }, + .functions_count = ARRAY_SIZE(msm_pinctrl_functions), + .get_function_name = sm8150_get_function_name, + .get_function_mux = sm8150_get_function_mux, + .get_pin_name = sm8150_get_pin_name, +}; + +static const struct udevice_id msm_pinctrl_ids[] = { + { .compatible = "qcom,sm8150-pinctrl", .data = (ulong)&sm8150_data }, + { /* Sentinel */ } +}; + +U_BOOT_DRIVER(pinctrl_sm8150) = { + .name = "pinctrl_sm8150", + .id = UCLASS_NOP, + .of_match = msm_pinctrl_ids, + .ops = &msm_pinctrl_ops, + .bind = msm_pinctrl_bind, +};