Re: [U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed

On 10/16/2013 08:18 AM, Oleg Dzhimiev wrote:

Thanks to Michal - in the u-boot-xlnx/master-next (vs /master) the following lines were removed: board/xilinx/zynq/board.c:

• /* temporary hack to take USB out of reset til the is fixed

• * in Linux
  

• */
  

• writel(0x80, 0xe000a204);
• writel(0x80, 0xe000a208);
• writel(0x80, 0xe000a040);
• writel(0x00, 0xe000a040);
• writel(0x80, 0xe000a040);

This is board-specific (but the same for zedboard & microzed) USB reset wired to MIO7. Without these lines USB reset stays active.

Please keep this discussion out of mainline u-boot because it has nothing to do with the code in the mainline.

I will send you separate email about this.

Thanks, Michal