Re: [U-Boot-Users] Problem starting u-boot on Xilinx V2P

In message 42CB7E35.8090805@IfEN.com you wrote:

My board is not as different to ml300 as one may think - indeed, it uses

Even minimal diffeences can have significant effects. Feel free to ignore my advice, but please don't complain if you run into problems later.

...

You missed to port U-Boot to your hardware. Go back to square 0. Read the README (porting guide section) and do what needs to be done.

Well - I _did_ port it (in the sense of using the appropriate BSP) -

No, you did not. For example, you missed to adapt the SDRAM initialization.

PowerPC code may hang immediatley _after_ "DRAM:" printout. This led me to the assumption, that my problem may be well known ...

It is. It is actually a FAQ.

Best regards,

Wolfgang Denk