Signed-off-by: Stefano Babic sbabic@denx.de --- drivers/spi/mxc_spi.c | 96 ++++++++++++++++++++++++++++++++++++------------ 1 files changed, 72 insertions(+), 24 deletions(-)
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index d558137..5670714 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -70,6 +70,8 @@ static unsigned long spi_bases[] = { 0x53f84000, };
+#define mxc_get_clock(x) mx31_get_ipg_clk() + #elif defined(CONFIG_MX51) #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> @@ -111,6 +113,45 @@ static unsigned long spi_bases[] = { CSPI2_BASE_ADDR, CSPI3_BASE_ADDR, }; + +#elif defined(CONFIG_MX35) + +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> + +#define MXC_CSPIRXDATA 0x00 +#define MXC_CSPITXDATA 0x04 +#define MXC_CSPICTRL 0x08 +#define MXC_CSPIINT 0x0C +#define MXC_CSPIDMA 0x10 +#define MXC_CSPISTAT 0x14 +#define MXC_CSPIPERIOD 0x18 +#define MXC_CSPITEST 0x1C +#define MXC_CSPIRESET 0x00 + +#define MXC_CSPICTRL_EN (1 << 0) +#define MXC_CSPICTRL_MODE (1 << 1) +#define MXC_CSPICTRL_XCH (1 << 2) +#define MXC_CSPICTRL_SMC (1 << 3) +#define MXC_CSPICTRL_POL (1 << 4) +#define MXC_CSPICTRL_PHA (1 << 5) +#define MXC_CSPICTRL_SSCTL (1 << 6) +#define MXC_CSPICTRL_SSPOL (1 << 7) +#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12) +#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20) +#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16) +#define MXC_CSPICTRL_TC (1 << 7) +#define MXC_CSPICTRL_RXOVF (1 << 6) +#define MXC_CSPICTRL_MAXBITS 0xfff + +#define MXC_CSPIPERIOD_32KHZ (1 << 15) +#define MAX_SPI_BYTES 4 + +static unsigned long spi_bases[] = { + 0x43fa4000, + 0x50010000, +}; + #else #error "Unsupported architecture" #endif @@ -158,8 +199,35 @@ void spi_cs_deactivate(struct spi_slave *slave) !(mxcs->ss_pol)); }
-#ifdef CONFIG_MX51 -static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs, +#if defined(CONFIG_MX31) || defined(CONFIG_MX35) +static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + unsigned int ctrl_reg; + + ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) | + MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS) | + MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate data rate */ + MXC_CSPICTRL_EN | +#ifdef CONFIG_MX35 + MXC_CSPICTRL_SSCTL | +#endif + MXC_CSPICTRL_MODE; + + if (mode & SPI_CPHA) + ctrl_reg |= MXC_CSPICTRL_PHA; + if (mode & SPI_CPOL) + ctrl_reg |= MXC_CSPICTRL_POL; + if (mode & SPI_CS_HIGH) + ctrl_reg |= MXC_CSPICTRL_SSPOL; + mxcs->ctrl_reg = ctrl_reg; + + return 0; +} +#endif + +#if defined(CONFIG_MX51) +static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, unsigned int max_hz, unsigned int mode) { u32 clk_src = mxc_get_clock(MXC_CSPI_CLK); @@ -227,7 +295,7 @@ static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs,
/* * Configuration register setup - * The MX51 has support different setup for each SS + * The MX51 supports different setup for each SS */ reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_SSPOL))) | (ss_pol << (cs + MXC_CSPICON_SSPOL)); @@ -363,7 +431,6 @@ int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen,
}
- int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, void *din, unsigned long flags) { @@ -441,7 +508,6 @@ static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs) struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { - unsigned int ctrl_reg; struct mxc_spi_slave *mxcs; int ret;
@@ -467,30 +533,12 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, mxcs->base = spi_bases[bus]; mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
-#ifdef CONFIG_MX51 - /* Can be used for i.MX31 too ? */ - ctrl_reg = 0; - ret = spi_cfg(mxcs, cs, max_hz, mode); + ret = spi_cfg_mxc(mxcs, cs, max_hz, mode); if (ret) { printf("mxc_spi: cannot setup SPI controller\n"); free(mxcs); return NULL; } -#else - ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) | - MXC_CSPICTRL_BITCOUNT(31) | - MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate data rate */ - MXC_CSPICTRL_EN | - MXC_CSPICTRL_MODE; - - if (mode & SPI_CPHA) - ctrl_reg |= MXC_CSPICTRL_PHA; - if (mode & SPI_CPOL) - ctrl_reg |= MXC_CSPICTRL_POL; - if (mode & SPI_CS_HIGH) - ctrl_reg |= MXC_CSPICTRL_SSPOL; - mxcs->ctrl_reg = ctrl_reg; -#endif return &mxcs->slave; }