The MAC address provided by the manufacturer can be read from the EEPROM. Add also Video support to the mt_ventoux (TAM3517) board.
Changes in v2: - Set dispc_config before checking for framebuffer - Use a common macro to set up the horizontal and vertical timing (Heiko Schocker) to not break beagleboard (Jeroen Hofstee)
Stefano Babic (9): OMAP3: tam3517: add function to read MAC from EEPROM OMAP3: twister : get MAC address from EEPROM OMAP3: mt_ventoux: Correct board pinmux OMAP3: mt_ventoux: activate GPIO4 OMAP3: mt_ventoux: read MAC address from EEPROM OMAP3: mt_ventoux: disable the buzzer at start-up video: drop duplicate set of DISPC_CONFIG register OMAP3: video: add macros to set display parameters OMAP3: mt_ventoux: added video support
arch/arm/include/asm/arch-omap3/dss.h | 5 +- board/technexion/twister/twister.c | 10 +++ board/teejet/mt_ventoux/mt_ventoux.c | 113 +++++++++++++++++++++++++++++++++ board/teejet/mt_ventoux/mt_ventoux.h | 80 ++++++++++------------- drivers/video/omap3_dss.c | 3 +- include/configs/mt_ventoux.h | 17 +++++ include/configs/tam3517-common.h | 66 +++++++++++++++++++ 7 files changed, 245 insertions(+), 49 deletions(-)