LS2088A-RDB supports TFA boot source and has 2 nor banks(default and altbank) and QSPI as boot source. The corresponding defconfig can only have one entry defined and therefore, extend cs4340_get_fw_addr() function to overwrite firmware address which will be later used in cortina firmware.
Signed-off-by: Kuldeep Singh kuldeep.singh@nxp.com --- board/freescale/ls2080ardb/ls2080ardb.c | 38 +++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index 6504cf768f..e8722f20c1 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -33,6 +33,9 @@ #endif #include "../common/vid.h"
+#define CORTINA_FW_ADDR_IFCNOR 0x580980000 +#define CORTINA_FW_ADDR_IFCNOR_ALTBANK 0x584980000 +#define CORTINA_FW_ADDR_QSPI 0x980000 #define PIN_MUX_SEL_SDHC 0x00 #define PIN_MUX_SEL_DSPI 0x0a
@@ -235,6 +238,41 @@ int config_board_mux(int ctrl_type) return 0; }
+ulong *cs4340_get_fw_addr(void) +{ +#ifdef CONFIG_TFABOOT + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 svr = gur_in32(&gur->svr); +#endif + ulong cortina_fw_addr = CONFIG_CORTINA_FW_ADDR; + +#ifdef CONFIG_TFABOOT + /* LS2088A TFA boot */ + if (SVR_SOC_VER(svr) == SVR_LS2088A) { + enum boot_src src = get_boot_src(); + u8 sw; + + switch (src) { + case BOOT_SOURCE_IFC_NOR: + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & 0x0f); + if (sw == 0) + cortina_fw_addr = CORTINA_FW_ADDR_IFCNOR; + else if (sw == 4) + cortina_fw_addr = CORTINA_FW_ADDR_IFCNOR_ALTBANK; + break; + case BOOT_SOURCE_QSPI_NOR: + /* Only one bank in QSPI */ + cortina_fw_addr = CORTINA_FW_ADDR_QSPI; + break; + default: + printf("WARNING: Boot source not found\n"); + } + } +#endif + return (ulong *)cortina_fw_addr; +} + int board_init(void) { #ifdef CONFIG_FSL_MC_ENET