This converts the following to Kconfig: CONFIG_BAUDRATE
Signed-off-by: Tom Rini trini@konsulko.com --- README | 5 ----- include/configs/apalis-imx8.h | 3 --- include/configs/bcm_northstar2.h | 1 - include/configs/bcmstb.h | 1 - include/configs/colibri-imx8x.h | 3 --- include/configs/controlcenterdc.h | 2 -- include/configs/dh_imx6.h | 1 - include/configs/display5.h | 1 - include/configs/grpeach.h | 3 --- include/configs/imx8mq_evk.h | 2 -- include/configs/imx8qm_mek.h | 3 --- include/configs/imx8qm_rom7720.h | 3 --- include/configs/imx8qxp_mek.h | 3 --- include/configs/ls1021atsn.h | 2 -- include/configs/ls1028a_common.h | 1 - include/configs/ls1088a_common.h | 1 - include/configs/lx2160a_common.h | 1 - include/configs/mx53ppd.h | 1 - include/configs/mx6memcal.h | 1 - include/configs/mx7ulp_evk.h | 1 - include/configs/owl-common.h | 3 --- include/configs/pdu001.h | 1 - include/configs/pico-imx8mq.h | 2 -- include/configs/presidio_asic.h | 1 - include/configs/rk3128_common.h | 1 - include/configs/rk3368_common.h | 1 - include/configs/wb50n.h | 2 -- 27 files changed, 50 deletions(-)
diff --git a/README b/README index bcf198363111..a0f54645fc26 100644 --- a/README +++ b/README @@ -670,11 +670,6 @@ The following options need to be configured: Define this variable to enable hw flow control in serial driver. Current user of this option is drivers/serial/nsl16550.c driver
-- Console Baudrate: - CONFIG_BAUDRATE - in bps - Select one of the baudrates listed in - CONFIG_SYS_BAUDRATE_TABLE, see below. - - Autoboot Command: CONFIG_BOOTCOMMAND Only needed when CONFIG_BOOTDELAY is enabled; diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index 08d34db1061e..6dad8216e969 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -103,9 +103,6 @@ #define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ #define PHYS_SDRAM_2_SIZE SZ_2G /* 2 GB */
-/* Serial */ -#define CONFIG_BAUDRATE 115200 - /* Monitor Command Prompt */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_CBSIZE SZ_2K diff --git a/include/configs/bcm_northstar2.h b/include/configs/bcm_northstar2.h index 45dc7b29c9e4..fbfab288b372 100644 --- a/include/configs/bcm_northstar2.h +++ b/include/configs/bcm_northstar2.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_NS16550_COM2 0x66110000 #define CONFIG_SYS_NS16550_COM3 0x66120000 #define CONFIG_SYS_NS16550_COM4 0x66130000 -#define CONFIG_BAUDRATE 115200
/* console configuration */ #define CONFIG_SYS_CBSIZE SZ_1K diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index 24569f7d94a8..01cfed0b869d 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -115,7 +115,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * Serial console configuration. */ -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ 115200}
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index da9226e2fbed..0ac4e7095de9 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -135,9 +135,6 @@ #define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
-/* Serial */ -#define CONFIG_BAUDRATE 115200 - /* Monitor Command Prompt */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_CBSIZE SZ_2K diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 00e5c8f7943e..0c36ea661057 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -112,8 +112,6 @@ */ #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200 - #define CONFIG_HOSTNAME "ccdc" #define CONFIG_ROOTPATH "/opt/nfsroot" #define CONFIG_BOOTFILE "ccdc.img" diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index 5bfdf4044bee..0b6617fa82e9 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -62,7 +62,6 @@ /* UART */ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_BAUDRATE 115200
/* USB Configs */ #ifdef CONFIG_CMD_USB diff --git a/include/configs/display5.h b/include/configs/display5.h index 3348ecc7c7ba..94baa6561022 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -66,7 +66,6 @@
/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200
#ifndef CONFIG_BOOTCOMMAND #define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \ diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h index 001e9d385ba1..bde168d47505 100644 --- a/include/configs/grpeach.h +++ b/include/configs/grpeach.h @@ -11,9 +11,6 @@ /* Board Clock , P1 clock frequency (XTAL=13.33MHz) */ #define CONFIG_SYS_CLK_FREQ 66666666
-/* Serial Console */ -#define CONFIG_BAUDRATE 115200 - /* Miscellaneous */ #define CONFIG_SYS_PBSIZE 256 #define CONFIG_CMDLINE_TAG diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index f71efd45abdb..33a301409520 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -175,8 +175,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */
-#define CONFIG_BAUDRATE 115200 - #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 8324767eb557..fd68c4f052e7 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -175,9 +175,6 @@ #define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */ #define PHYS_SDRAM_2_SIZE 0x100000000 /* 4 GB */
-/* Serial */ -#define CONFIG_BAUDRATE 115200 - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 8000000 /* 8MHz */
diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 89d7adabea84..9808e72474f0 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -163,9 +163,6 @@ /* LPDDR4 board total DDR is 6GB, DDR4 board total DDR is 4 GB */ #define PHYS_SDRAM_2_SIZE 0x80000000 /* 2 GB */
-/* Serial */ -#define CONFIG_BAUDRATE 115200 - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 8000000 /* 8MHz */
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index a58f68c17e6c..b442b48becf5 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -175,9 +175,6 @@ /* LPDDR4 board total DDR is 3GB */ #define PHYS_SDRAM_2_SIZE 0x40000000 /* 1 GB */
-/* Serial */ -#define CONFIG_BAUDRATE 115200 - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 8000000 /* 8MHz */
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 46c60aaf5cbc..ec2ed7c60969 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -104,8 +104,6 @@ #endif #define CONFIG_SYS_NS16550_CLK get_serial_clock()
-#define CONFIG_BAUDRATE 115200 - /* I2C */ #ifndef CONFIG_DM_I2C #define CONFIG_SYS_I2C diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index f9040e661d01..44f2dc8f9b41 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -48,7 +48,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
-#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* Miscellaneous configurable options */ diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 596f14bf3e9e..3ea16752de09 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -64,7 +64,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
-#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS) diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 5ab924457efb..a8636d398eeb 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -78,7 +78,6 @@ (void *)CONFIG_SYS_SERIAL1, \ (void *)CONFIG_SYS_SERIAL2, \ (void *)CONFIG_SYS_SERIAL3 } -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* MC firmware */ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index bb6d82d32749..2ee66612c21b 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -33,7 +33,6 @@
/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200
/* Command definition */
diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h index b774b167f648..0a28d61703a2 100644 --- a/include/configs/mx6memcal.h +++ b/include/configs/mx6memcal.h @@ -27,7 +27,6 @@ #else #error please define serial console (CONFIG_SERIAL_CONSOLE_UARTx) #endif -#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16)
diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 942b7dd41483..5e05b8c16693 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -39,7 +39,6 @@
/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_CACHELINE_SIZE 64
diff --git a/include/configs/owl-common.h b/include/configs/owl-common.h index f77a5fa4c114..98b5a96cf61c 100644 --- a/include/configs/owl-common.h +++ b/include/configs/owl-common.h @@ -29,9 +29,6 @@ */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x7ff00)
-/* UART Definitions */ -#define CONFIG_BAUDRATE 115200 - /* Console configuration */ #define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */ #define CONFIG_SYS_MAXARGS 64 diff --git a/include/configs/pdu001.h b/include/configs/pdu001.h index d524f3cbcf01..e4b14c5ecd6b 100644 --- a/include/configs/pdu001.h +++ b/include/configs/pdu001.h @@ -73,6 +73,5 @@ #define CONFIG_SYS_NS16550_COM4 UART3_BASE #define CONFIG_SYS_NS16550_COM5 UART4_BASE #define CONFIG_SYS_NS16550_COM6 UART5_BASE -#define CONFIG_BAUDRATE 115200
#endif /* ! __CONFIG_PDU001_H */ diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 2ae13b30ee53..7b7d633f2828 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -150,8 +150,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ (PHYS_SDRAM_SIZE >> 1))
-#define CONFIG_BAUDRATE 115200 - #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 51177f44feed..34235b5a00c1 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -41,7 +41,6 @@ #define CORTINA_SERIAL_PORTS {(void *)CONFIG_SYS_SERIAL0, \ (void *)CONFIG_SYS_SERIAL1}
-#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_SERIAL0 PER_UART0_CFG #define CONFIG_SYS_SERIAL1 PER_UART1_CFG
diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index d0c9e5c809df..8f1d508b8ce2 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -9,7 +9,6 @@ #include "rockchip-common.h"
#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h index e57d0efa7f92..f178a06945db 100644 --- a/include/configs/rk3368_common.h +++ b/include/configs/rk3368_common.h @@ -15,7 +15,6 @@
#define CONFIG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xff000000 -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/wb50n.h b/include/configs/wb50n.h index c2112763a2bb..a210449dae49 100644 --- a/include/configs/wb50n.h +++ b/include/configs/wb50n.h @@ -72,8 +72,6 @@ #define CONFIG_BOOTARGS \ "rw rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
-#define CONFIG_BAUDRATE 115200 - #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \