Hi,
On Thu, Mar 24, 2016 at 2:46 PM, Michael Haas haas@computerlinguist.org wrote:
This patch is required to get reliable 1000BASE-T operation on some boards using the RTL8211C(L) PHY.
Following discussions on v2 of this patch, I have removed the incorrect check for the RTL8211C(L). Affected boards now have to define CONFIG_RTL8211X_PHY_FORCE_MASTER to benefit from the fix.
Note that this patch requires Karsten Merkers '[PATCH] net: phy: Realtek RTL8211B/C PHY ID fix' as well as Hans de Goede's recent u-boot-sunxi pull request, specifically 1eae8f66ff749409eb96e2f3f3387c56232d0b8a and fc8991c61c393ce6a9d3dfc97cb56dbbd9e8cbba.
Michael
Changes in v3:
- Remove incorrect detection of RTL8211CL and use #ifdef instead (thanks to Karsten Merker)
- Introduced constants for register bits
Changes in v2:
- Removed accidental inclusion of Karsten's patch in my first submission of this series.
- Fix a typo in the code: 6 -> &
Michael Haas (4): net: phy: Optionally force master mode for RTL PHY
net: phy: Force master mode for A20-Olimex-SOM-EVB net: phy: Force master mode A20-OLinuXino-Lime2
These 2 should probably read:
sunxi: A20-Olxxxxxxxxx: Force master mode for RTL8211CL
ChenYu
net: phy: Add RTL8211X_PHY_FORCE_MASTER to Kconfig
configs/A20-OLinuXino-Lime2_defconfig | 1 + configs/A20-Olimex-SOM-EVB_defconfig | 1 + drivers/net/Kconfig | 17 +++++++++++++++++ drivers/net/phy/realtek.c | 13 ++++++++++++- 4 files changed, 31 insertions(+), 1 deletion(-)
-- 2.7.2
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot