am57x_idk_lcd_detect() exits immediately if a known board not having an LCD is found, i.e. a non-IDK board. This is annoying as we have to remember to add an extra OR clause for every new non-IDK board.
Add a board_is_ti_idk() macro so that the logic becomes positive (detect LCD on IDK boards instead of not-known-without-LCD boards). Even more important, add the macro just below the board_is_*_idk() macros, so it is easy to remember to update it when adding a new IDK.
Signed-off-by: Luca Ceresoli luca@lucaceresoli.net --- board/ti/am57xx/board.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index c41aa24f957b..511858a5e90c 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -61,6 +61,10 @@ static int board_bootmode_has_emmc(void); #define board_is_am571x_idk() board_ti_is("AM571IDK") #define board_is_bbai() board_ti_is("BBONE-AI")
+#define board_is_ti_idk() board_is_am574x_idk() || \ + board_is_am572x_idk() || \ + board_is_am571x_idk() + #ifdef CONFIG_DRIVER_TI_CPSW #include <cpsw.h> #endif @@ -666,7 +670,7 @@ void am57x_idk_lcd_detect(void) struct udevice *dev;
/* Only valid for IDKs */ - if (board_is_x15() || board_is_am572x_evm() || board_is_bbai()) + if (!board_is_ti_idk()) return;
/* Only AM571x IDK has gpio control detect.. so check that */