On Sat, Jul 8, 2023 at 1:55 PM Marek Vasut marex@denx.de wrote:
On 6/9/23 19:28, Tim Harvey wrote:
Add support for enabling and disabling vbus-supply regulator found on several imx8mp boards in the usb3_phy0 and usb3_phy1 nodes.
Signed-off-by: Tim Harvey tharvey@gateworks.com Reviewed-by: Adam Ford aford173@gmail.com
v2:
- protect ret with __maybe_unused in case CONFIG_CLK and CONFIG_DM_REGULATOR not defined
- add error prints on failures
- add Adam's rb tag
drivers/phy/phy-imx8mq-usb.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-imx8mq-usb.c b/drivers/phy/phy-imx8mq-usb.c index 69f01de55538..53099436b04b 100644 --- a/drivers/phy/phy-imx8mq-usb.c +++ b/drivers/phy/phy-imx8mq-usb.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/err.h> #include <clk.h> +#include <power/regulator.h>
#define PHY_CTRL0 0x0 #define PHY_CTRL0_REF_SSP_EN BIT(2) @@ -81,6 +82,7 @@ struct imx8mq_usb_phy { #endif void __iomem *base; enum imx8mpq_phy_type type;
Shouldn't this be in #if CONFIG_IS_ENABLED(DM_REGULATOR) ?
struct udevice *vbus_supply;
Hi Marek,
No, the usage of it is within an 'if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply)' statement
};
static const struct udevice_id imx8mq_usb_phy_of_match[] = { @@ -172,10 +174,10 @@ static int imx8mq_usb_phy_power_on(struct phy *usb_phy) { struct udevice *dev = usb_phy->dev; struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev);
__maybe_unused int ret; u32 value;#if CONFIG_IS_ENABLED(CLK)
int ret; ret = clk_enable(&imx_phy->phy_clk); if (ret) { printf("Failed to enable usb phy clock\n");@@ -183,6 +185,14 @@ static int imx8mq_usb_phy_power_on(struct phy *usb_phy) } #endif
if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply) {ret = regulator_set_enable(imx_phy->vbus_supply, true);if (ret) {pr_err("Failed to enable VBUS regulator: %d\n", ret);You do need to disable clock enabled above.
it does get disabled in imx8mq_usb_phy_power_off()
This likely needs a fail path with "err: ... return ret;"
there are no further conditional return paths in this function.
return ret;}}/* Disable rx term override */ value = readl(imx_phy->base + PHY_CTRL6); value &= ~PHY_CTRL6_RXTERM_OVERRIDE_SEL;@@ -195,6 +205,7 @@ static int imx8mq_usb_phy_power_off(struct phy *usb_phy) { struct udevice *dev = usb_phy->dev; struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev);
__maybe_unused int ret; u32 value; /* Override rx term to be 0 */@@ -206,6 +217,14 @@ static int imx8mq_usb_phy_power_off(struct phy *usb_phy) clk_disable(&imx_phy->phy_clk); #endif
if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply) {ret = regulator_set_enable(imx_phy->vbus_supply, false);if (ret) {pr_err("Failed to disable VBUS regulator: %d\n", ret);btw with DM, these can be dev_err() .
Ok, I will send a v3 with that.
Best regards,
Tim
return ret;}}return 0;[...]