Enable the ATF in SPL and adjust the SPL STACK/HEAD at the same time to support ATF entry at 0x40000.
Signed-off-by: Kever Yang kever.yang@rock-chips.com ---
configs/evb-rk3328_defconfig | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig index 3e19135a0d..3db40a9a1a 100644 --- a/configs/evb-rk3328_defconfig +++ b/configs/evb-rk3328_defconfig @@ -7,7 +7,8 @@ CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_SPL_STACK_R_ADDR=0x4000000 +CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000 CONFIG_NR_DRAM_BANKS=1 CONFIG_DEBUG_UART_BASE=0xFF130000 CONFIG_DEBUG_UART_CLOCK=24000000 @@ -23,6 +24,9 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_TPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_ATF=y +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y CONFIG_TPL_DRIVERS_MISC_SUPPORT=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y