On 00:45-20231220, Apurva Nandan wrote:
memory node is used by fdtdec_setup_mem_size_base() and fdtdec_setup_memory_banksize() during dram_init(), so use bootph-all to enable for all stages.
Signed-off-by: Apurva Nandan a-nandan@ti.com
arch/arm/dts/k3-am69-sk-u-boot.dtsi | 6 ++++++ arch/arm/dts/k3-j784s4-evm-u-boot.dtsi | 6 ++++++ 2 files changed, 12 insertions(+)
diff --git a/arch/arm/dts/k3-am69-sk-u-boot.dtsi b/arch/arm/dts/k3-am69-sk-u-boot.dtsi index d1623b6bbe..6d848ba6bc 100644 --- a/arch/arm/dts/k3-am69-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am69-sk-u-boot.dtsi @@ -5,6 +5,12 @@
#include "k3-j784s4-binman.dtsi"
+/ {
- memory@80000000 {
bootph-all;- };
+};
&mcu_udmap { reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x284c0000 0x0 0x4000>, diff --git a/arch/arm/dts/k3-j784s4-evm-u-boot.dtsi b/arch/arm/dts/k3-j784s4-evm-u-boot.dtsi index 74de8a4db8..ac749782bf 100644 --- a/arch/arm/dts/k3-j784s4-evm-u-boot.dtsi +++ b/arch/arm/dts/k3-j784s4-evm-u-boot.dtsi @@ -5,6 +5,12 @@
#include "k3-j784s4-binman.dtsi"
+/ {
- memory@80000000 {
bootph-all;- };
+};
&mcu_udmap { reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x284c0000 0x0 0x4000>,
Is there a patch submitted for upstream kernel?
This should be part of your patch for board.dts instead of a patch that fixes multiple board.dts after introducing the dts in the same series.
So squash this change to relevant patches please and please refer to upstream kernel patch so that we can drop this later on.