Re: [U-Boot-Users] Target hangs during relocate_code() call

On Thu, 2006-03-02 at 10:33, Rick Nardone wrote:

U-Boot 1.1.4 (Mar 2 2006 - 10:27:01) CPU: 8540, Version: 1.0, (0x80300010) Core: E500, Version: 1.0, (0x80200010)

Clock Configuration: CPU: 396 MHz, CCB: 132 MHz, DDR: 66 MHz, LBC: 66 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: Wind River SBC8540 Board

call to relocate_code()

Dest Addr =0x1FFADF48, Src Addr = 0x1FFADF60, size = 536674304 bytes

Almost certainly, your DDR setup is incorrect. Verify that you are programming your DDR controller properly according to the specs.

jdl